Filamelt ammunition box / 50 AE / 'folding / latch cover' / cartridge box, ammo box

Filamelt Cartridge Box / Ammo Box
Ammunition box for 50 AE with flip/latch lid
Caliber-specific storage for 50 AE – precisely made and Made in Germany. No more loose cartridges and packaging chaos: a uniform system for the gun cabinet, range, and hunting grounds.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no imports

Does this fit my ammunition?


Caliber
50 AE


Suitable for


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 50 AE ammunition?


Variant
Outer dimension
Weight
For what


81 cartridges
15.8 × 13.7 × 6.3 cm
270 g


Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 50 AE box special


Caliber-specific fit
Each slot is designed to the caliber according to CIP dimensions: the cartridges are held firmly, play and rattling are minimized as much as possible. Precisely constructed, not improvised.


Hinge lid with latch closure
The lid is hinged at the back and folds fully backward – the cartridges then stand upright and ready to grab in the securely fitting insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the catch.


Stable & durable
Sturdily printed with thick walls: holds together in the gun cabinet, range bag, and at the range. Reusable instead of disposable box.


Caliber marking in multicolor print
The caliber marking is incorporated directly into the box print in multiple colors – permanent, without stickers or engraving. In a full gun cabinet, you immediately grab the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready to grab for range, hunting grounds, and range bag.


Made in Westerwald

Made in own production in Westerwald, piece by piece – instead of anonymous imports. The 3D printing runs mostly on solar power from our own 22-kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Frequently asked questions about the 50 AE box


Do my reloads fit too?
The box is designed for CIP-compliant cartridges. Own loadings with longer overall length (long bullets, shallow seating depth) can get tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the catch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes, as an organizing and storage box for the range bag. However, it is not a safety container according to WaffG/AWaffV and not a dangerous goods packaging.


Can the box withstand heat (e.g. summer trunk)?
Under normal room and cabinet storage, the box remains dimensionally stable. Like all PLA materials, it is not made for permanent heat – it should not be left for extended periods in a hot summer trunk (well above 50 °C).


What are the tolerances in 3D printing?
Due to manufacturing, slight tolerances are possible. The cartridges still sit firmly in the slot – a minimal residual play remains by design, and unnecessary pressure on d
The bullet nose is avoided as much as possible.



No more loose cartridges
Choose your capacity for 50 AE – from the small box for the range bag to the large box for storage.


Important notes: Delivery is without ammunition. This box is intended for organization and transport and is not a safety container within the meaning of § 36 WaffG / § 13 AWaffV; it does not replace the legally required ammunition storage and does not have ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; trademark and name rights remain with the respective owners.