Filamelt ammunition box / 460 S&W Magnum / 'folding / locking lid' / cartridge box, ammo box

Filamelt Ammo Box
Ammo box for 460 S&W Magnum with flip/latch lid
Order for your 460 S&W Magnum cartridges – custom-fit slots according to CIP dimensions, 3D printed in Germany. Instead of loose cartridges and colorful manufacturer boxes, a uniform system for cabinet, range, and hunting grounds.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in stock · no imported goods

Does this fit my ammunition?


Caliber
460 S&W Magnum


Suitable for


Fit
caliber-specific slots according to CIP standard dimensions; minimizes play and rattling


All information based on official CIP data. If you notice an error, please let us know briefly.


Which size fits your 460 S&W Magnum ammunition?


Variant
Outer dimension
Weight
For what


25 cartridges
9.4 × 7.4 × 7.8 cm
147 g
Training unit


45 cartridges
15.8 × 7.4 × 7.8 cm
231 g



Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 460 S&W Magnum box special


Caliber-specific fit
Custom-fit slots according to CIP standard dimensions – each cartridge sits firmly in its place, minimizing play and rattling. The shape follows the caliber, not the drawer.


Hinge lid with latch closure
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely fitting insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the latch.


Stable & durable
Thick walls, densely printed layers – the box holds together reliably in the gun cabinet, range bag, and on the go. Reusable, not a disposable carton.


Caliber marking in multicolor print
The caliber marking is multicolored and directly integrated into the box print – permanent, without stickers or engraving. In a full gun cabinet, you immediately grab the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready to grab for range, hunting grounds, and range bag.


Made in Westerwald

Manufactured in own production in Westerwald, piece by piece – instead of anonymous imports. The 3D printing runs largely on solar power from our own 22-kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Frequently asked questions about the 460 S&W Magnum box


Do my reloads fit too?
The box is designed for CIP-compliant cartridges. Custom loads with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not open accidentally during transport. To open, release the latch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes, as an organization and storage box for the range bag. However, it is not a safety container according to WaffG/AWaffV and not a hazardous material packaging.


Can the box withstand heat (e.g., summer trunk)?
Under normal room and cabinet storage, the box remains dimensionally stable. Like all PLA materials, it is not made for permanent heat – it should not be left for extended periods in a hot summer trunk (well over 50 °C).


What are the tolerances in 3D printing?
Due to manufacturing, slight tol
eranzen möglich. Die cartridges still sit firmly in the slot – a minimal play remains due to the design, and unnecessary pressure on the bullet nose is avoided as much as possible.



No more loose cartridges
Choose your capacity for 460 S&W Magnum – from the small box for the range bag to the large box for storage.


Important notes: Delivery is without ammunition. This box is for organizing and transporting and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the required ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; trademark and name rights remain with the respective owners.