Filamelt ammunition box / 45-70 Government / 'folding / locking lid' / cartridge box, ammo box

Filamelt Ammo Box / Ammo Box
Ammo box for 45-70 Government with flip/latch lid
Order for your 45-70 Government cartridges – custom-fit slots according to CIP dimensions, made with 3D printing in Germany. Instead of loose cartridges and colorful manufacturer boxes, a uniform system for cabinet, range, and hunting ground.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no imported goods

Does it fit my ammunition?


Caliber
45-70 Government


Suitable for


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 45-70 Government ammunition?


Variant
Outer dimension
Weight
For what


32 cartridges
15.8 × 7.4 × 8.7 cm
220 g


36 cartridges

208 g


64 cartridges

334 g



Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 45-70 Government box special


Caliber-specific fit
Slots designed according to CIP dimensions give each cartridge firm, defined hold – play and rattling are minimized. Constructed according to CIP standard dimensions for 45-70 Government.


Hinge lid with latch closure
The lid is attached at the back via a hinge and flips fully backward – the cartridges then stand upright and ready to grab in the securely seated insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the latch.


Stable & durable
Thick walls, densely printed layers – the box holds reliably together in the gun cabinet, range bag, and on the go. Reusable, not a disposable carton.


Caliber marking in multicolor print
The caliber designation is multicolored directly integrated into the box print – permanent, without stickers or engraving. In a full gun cabinet, you immediately grab the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready for range, hunting ground, and range bag.


Made in Westerwald

Made in own production in Westerwald, piece by piece – instead of anonymous imports. The 3D printing runs mostly on solar power from our own 22-kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Frequently asked questions about the 45-70 Government box


Do my reloads fit too?
The box is designed for CIP-compliant cartridges. Own loadings with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the latch with your finger; the lid then flips backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
They are well suited for transport in the range bag – as an organizing and storage box. They do not replace a legally required safety container (WaffG/AWaffV) and are not dangerous goods packaging.


Can the box withstand heat (e.g. summer trunk)?
Designed for room and cabinet temperature and permanently shape-stable there. PLA remains temperature sensitive: prolonged heat, such as in a heated summer trunk, is better avoided.


What are the tolerances in 3D printing?
Due to manufacturing, are
low tolerances possible. The cartridges still sit firmly in the slot – a minimal play remains due to the design, and unnecessary pressure on the bullet nose is avoided as much as possible.



No more loose cartridges
Grab the matching 45-70 Government box – small for the range bag, large for stock in the gun safe.


Important notes: Delivery is without ammunition. This box is for organization and transport and is not a safety container within the meaning of § 36 WaffG / § 13 AWaffV; it does not replace the prescribed ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; brand and name rights remain with the respective owners.