Filamelt ammunition box / 45-110 / 'folding / locking lid' / cartridge box, ammo box

Filamelt Ammo Box / Ammo Box
Ammo box for 45-110 with flip/latch lid
Caliber-specific storage for 45-110 – precisely made and Made in Germany. No more loose cartridges and packaging chaos: a uniform system for the gun cabinet, range, and hunting grounds.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no imported goods

Does this fit my ammunition?


Caliber
45-110


Suitable for


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 45-110 ammunition?


Variant
Outer dimension
Weight
For what


32 cartridges
15.8 × 7.4 × 10.4 cm
253 g


Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 45-110 box special


Caliber-specific fit
Precisely fitting slots according to CIP standard dimension – each cartridge sits firmly in its place, play and rattling reduced to a minimum. The shape follows the caliber, not the drawer.


Hinge lid with latch closure
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely seated insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the latch.


Stable & durable
Sturdily printed with thick walls: holds together in the gun cabinet, range bag, and at the range. Reusable instead of disposable box.


Caliber marking in multicolor print
The caliber marking is multicolored and directly integrated into the box print – permanent, without stickers or engraving. In a full gun cabinet, you immediately grab the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready to grab for range, hunting grounds, and range bag.


Made in Westerwald

Made in own production in Westerwald, piece by piece – instead of anonymous imports. The 3D printing runs mostly on solar power from our own 22 kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Frequently asked questions about the 45-110 box


Do my reload cartridges fit too?
The box is designed for CIP-compliant cartridges. Own loadings with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the latch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes, as an organization and storage box for the range bag. However, it is not a safety container according to WaffG/AWaffV and not a hazardous goods packaging.


Can the box withstand heat (e.g. summer trunk)?
Yes, it remains dimensionally stable under normal storage. High continuous heat – like in a hot trunk in midsummer – is not suitable for PLA; the box is not intended for that.


What are the tolerances in 3D printing?
Small manufacturing tolerances are normal in 3D printing. This does not affect the firm fit of the cartridges; a slight residual play remains due to the design, and the bullet nose is protected as much as possible.


No more loose cartridges
Choose your K
Capacity for 45-110 – from the small box for the range bag to the large box for storage.


Important notes: Delivery is without ammunition. This box is for organizing and transporting and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the legally required ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; trademark and naming rights remain with the respective owners.