Filamelt ammunition box / 410 GA / 'folding / locking lid' / cartridge box, ammo box

Filamelt Ammo Box / Ammo Box
Ammo box for 410 GA with flip/latch lid
Order for your 410 GA cartridges – custom-fit slots according to CIP dimensions, made with 3D printing in Germany. Instead of loose cartridges and colorful manufacturer boxes, a uniform system for cabinet, range, and field.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in stock · no imports

Does this fit my ammunition?


Caliber
410 GA


Suitable for


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 410 GA ammunition?


Variant
Outer dimension
Weight
For what


32 cartridges
182 g


64 cartridges
15.8 × 13.7 × 8.0 cm
343 g



Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 410 GA box special


Caliber-specific fit
Custom-fit slots according to CIP standard dimension – each cartridge sits firmly in its place, play and rattling reduced to a minimum. The shape follows the caliber, not the drawer.


Hinge lid with latch closure
The lid is attached at the back with a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely seated insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the latch.


Stable & durable
Sturdily printed with thick walls: holds together in the gun cabinet, range bag, and at the range. Reusable instead of disposable box.


Caliber marking in multicolor print
The caliber marking is incorporated in multicolor directly into the box print – permanent, without stickers or engraving. In a full gun cabinet, you immediately reach for the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammo count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready for range, field, and range bag.


Made in Westerwald

From Westerwald, not from a container: We produce each box ourselves with 3D printing – largely powered by solar energy from our own 22 kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Frequently asked questions about the 410 GA box


Do my reloads fit too?
The box is designed for CIP-compliant cartridges. Custom loads with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the latch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes. As a storage and organization box, it accompanies you in the range bag. However, it is not a security container according to WaffG/AWaffV and not an approved hazardous materials packaging.


Can the box withstand heat (e.g., summer trunk)?
Yes, it remains dimensionally stable under normal storage. High continuous heat – like in a hot car trunk in midsummer – is not suitable for PLA; the box is not intended for that.


What are the tolerances in 3D printing?
Due to manufacturing, slight tolerances are possible. The cartridges still sit firmly in the slot – minimal residual play remains by design, and unnecessary pressure on the bullets is avoided.
Wads are avoided as much as possible.



No more loose cartridges
Grab the matching 410 GA box – small for the range bag, large for stock in the gun safe.


Important notes: Delivery is without ammunition. This box is for organizing and transporting and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the legally required ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; brand and name rights remain with the respective owners.