Filamelt ammunition box / 35 Whelen / 'folding / locking lid' / cartridge box, ammo box

Filamelt Ammo Box / Ammo Box
Ammo box for 35 Whelen with flip/latch lid
The 35 Whelen box brings order to your ammunition: caliber-specific slots, multicolor printed front & lid, Made in Germany. No loose cartridges, no jumble of manufacturer boxes – a uniform look for your gun cabinet, shooting range, and hunting ground.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no imports

Does it fit my ammunition?


Caliber
35 Whelen


Suitable for


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 35 Whelen ammunition?


Variant
Outer dimension
Weight
For what


50 cartridges
15.8 × 7.4 × 10.4 cm
226 g
full training day


Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 35 Whelen box special


Caliber-specific fit
Each slot is designed to the caliber according to CIP dimensions: the cartridges find a firm hold, play and rattling are minimized as much as possible. Dimensionally accurate design, not improvised.


Hinge lid with latch lock
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely seated insert. A latch lock at the front keeps the lid securely closed during transport; to open, simply release the catch.


Stable & durable
Solid construction for continuous use – stable standing in the cabinet, well stored in the range bag, reusable instead of disposable packaging.


Caliber marking in multicolor print
The caliber designation is multicolor directly integrated into the box print – permanent, without stickers and without engraving. In a full gun cabinet, you immediately grab the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or weapon – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready to grab for range, hunting ground, and range bag.


Made in Westerwald

From Westerwald, not from a container: We produce each box ourselves in 3D printing – largely with solar power from our own 22 kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Frequently asked questions about the 35 Whelen box


Do my reload cartridges fit too?
The box is designed for CIP-compliant cartridges. Own loadings with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch lock at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the catch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes. As a storage and organization box, it accompanies you in the range bag. However, it is not a security container according to WaffG/AWaffV and not an approved hazardous goods packaging.


Can the box withstand heat (e.g. summer trunk)?
With normal room and cabinet storage, the box remains dimensionally stable permanently. Like all PLA materials, it is not made for permanent heat – it should not lie in a hot summer trunk (well above 50 °C) for extended periods.


What are the tolerances in 3D printing?
Slight tolerances are part of 3D printing. The cartridges fin
the still secure hold in the slot – a minimal play remains due to the design; pressure on the bullet nose is avoided as much as possible.



No more loose cartridges
Grab the matching 35 Whelen box – small for the range bag, large for storage in the gun safe.


Important notes: Delivery is without ammunition. This box is for organizing and transporting and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the required ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; brand and name rights remain with the respective owners.