Filamelt ammunition box / 35 Remington / 'folding / latch cover' / cartridge box, ammo box

Filamelt Ammo Box / Ammo Box
Ammo box for 35 Remington with flip/latch lid
The 35 Remington box brings order to your ammunition: caliber-specific slots, multicolor printed front & lid, Made in Germany. No loose cartridges, no collection of manufacturer boxes – a uniform look for your gun cabinet, shooting range, and hunting grounds.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no imported goods

Does it fit my ammunition?


Caliber
35 Remington


Suitable for


Fit
caliber-specific slots according to CIP standard dimensions; minimizes play and rattling


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 35 Remington ammunition?


Variant
Outer dimension
Weight
Purpose


100 cartridges
15.8 × 13.7 × 8.5 cm
357 g
Monthly supply / storage


Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 35 Remington box special


Caliber-specific fit
Precisely fitting slots according to CIP standard dimension – each cartridge sits firmly in its place, minimizing play and rattling. The shape follows the caliber, not the drawer.


Hinge lid with latch closure
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely fitting insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the latch.

Durable & sturdy
Thick walls, densely printed layers – the box holds together reliably in the gun cabinet, range bag, and on the go. Reusable, no disposable carton.

Caliber marking in multicolor print
The caliber designation is multicolor integrated directly into the box print – permanent, without stickers or engraving. In a full gun cabinet, you immediately reach for the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized supply: uniformly labeled in the gun cabinet, ready to grab for range, hunting grounds, and range bag.


Made in Westerwald

Manufactured in own production in Westerwald, piece by piece – instead of anonymous imports. The 3D printing runs largely on solar power from our own 22-kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Frequently asked questions about the 35 Remington box


Do my reloads fit too?
The box is designed for CIP-compliant cartridges. Custom loads with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not open accidentally during transport. To open, release the latch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes. As a storage and organization box, it accompanies you in the range bag. However, it is not a safety container according to WaffG/AWaffV and not an approved hazardous materials packaging.


Can the box withstand heat (e.g., summer trunk)?
Designed for room and cabinet temperature and permanently dimensionally stable there. PLA remains temperature sensitive: prolonged heat, such as in a heated summer trunk, should be avoided.


What are the tolerances in 3D printing?
Slight tolerances are part of 3D printing. The cartridg
onen still find secure hold in the slot – a minimal play remains due to the design; pressure on the bullet nose is avoided as much as possible.



No more loose cartridges
Choose the right size for 35 Remington – from the handy range box to the storage size for the cabinet.


Important notes: Delivery is without ammunition. This box is for organizing and transporting and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the required ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; trademark and name rights remain with the respective owners.