Filamelt ammunition box / 338 Lapua Magnum / 'folding / latch cover' / cartridge box, ammo box

Filamelt Cartridge Box / Ammo Box
Ammunition box for 338 Lapua Magnum with flip/latch lid
Caliber-specific storage for 338 Lapua Magnum – precisely made and Made in Germany. No more loose cartridges and packaging chaos: a uniform system for the gun cabinet, range, and hunting ground.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no imported goods

Does this fit my ammunition?


Caliber
338 Lapua Magnum


Suitable for


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 338 Lapua Magnum ammunition?


Variant
Outer dimension
Weight
For what


32 cartridges

270 g


64 cartridges
15.8 × 13.7 × 11.5 cm
461 g



Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 338 Lapua Magnum box special


Caliber-specific fit
Precisely fitting slots according to CIP standard dimension – each cartridge sits firmly in its place, minimizing play and rattling. The shape follows the caliber, not the drawer.


Hinge lid with latch closure
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely seated insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the catch.


Stable & durable
Sturdily printed with thick walls: holds together in the gun cabinet, range bag, and at the range. Reusable instead of disposable box.


Caliber marking in multicolor print
The caliber designation is multicolored and directly integrated into the box print – permanent, without stickers or engraving. In a full gun cabinet, you immediately grab the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready to grab for range, hunting ground, and range bag.


Made in Westerwald

Made in own production in Westerwald, piece by piece – instead of anonymous imports. The 3D printing runs largely on solar power from our own 22-kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Frequently asked questions about the 338 Lapua Magnum box


Do my reloads fit too?
The box is designed for CIP-compliant cartridges. Own loadings with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the catch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes, as an organization and storage box for the range bag. However, it is not a safety container according to WaffG/AWaffV and not a hazardous goods packaging.


Can the box withstand heat (e.g. summer trunk)?
Designed for room and cabinet temperature and permanently dimensionally stable there. PLA remains temperature sensitive: prolonged heat, such as in a heated summer trunk, should be avoided.


What are the tolerances in 3D printing?
Due to manufacturing, slight tolerances are possible. The cartridges still sit firmly in the slot – a minimal residual play remains constructively
ionsbedingt, und unnötiger Druck auf die Geschossnase wird soweit möglich vermieden.



Schluss mit losen cartridges
Such dir die passende Größe für 338 Lapua Magnum aus – von der handlichen Range-Box bis zum Vorratsformat für den Schrank.


Wichtige Hinweise: Lieferung erfolgt ohne ammunition. Diese Box dient der Organisation und dem Transport und ist kein Sicherheitsbehältnis im Sinne von § 36 WaffG / § 13 AWaffV; sie ersetzt keine vorgeschriebene Munitionsaufbewahrung und besitzt keine ADR-/UN-Gefahrgutzulassung. Bitte prüfe vor Nutzung die Eignung für deine konkrete cartridge. Lizenziertes Design: CincinnatiDesigns. Dieses Produkt wird in Lizenz gefertigt; Marken- und Namensrechte verbleiben bei den jeweiligen Inhabern.