Filamelt ammunition box / 300 Norma Magnum / 'folding / locking lid' / cartridge box, ammo box

Filamelt Ammo Box
Ammo box for 300 Norma Magnum with flip/latch lid
The 300 Norma Magnum box brings order to your ammunition: caliber-specific slots, multicolored printed front & lid, Made in Germany. No loose cartridges, no collection of manufacturer boxes – a uniform look for your gun cabinet, shooting range, and hunting grounds.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no imports

Does it fit my ammunition?


Caliber
300 Norma Magnum


Suitable for


Fit
caliber-specific slots according to CIP standard dimensions; minimizes play and rattling


All information based on official CIP data. If you notice an error, please let us know briefly.


Which size fits your 300 Norma Magnum ammunition?


Variant
External dimensions
Weight
For


32 cartridges
15.8 × 7.4 × 11.5 cm
275 g


64 cartridges
15.8 × 13.7 × 11.5 cm
430 g



External dimensions = assembled box (L × W × H). Delivery without ammunition.


What makes the 300 Norma Magnum box special


Caliber-specific fit
Precisely fitting slots according to CIP standard size – each cartridge sits firmly in its place, minimizing play and rattling. The shape follows the caliber, not the drawer.


Hinge lid with latch closure
The lid is attached at the back with a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely seated insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the catch.


Stable & durable
Solid construction for continuous use – stable standing in the cabinet, well stored in the range bag, reusable instead of disposable packaging.


Caliber marking in multicolor print
The caliber designation is multicolored and directly integrated into the box print – permanent, without stickers or engraving. In a full gun cabinet, you immediately grab the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready for range, hunting grounds, and range bag.


Made in Westerwald
We print every box ourselves in Westerwald – no container imports, no anonymous mass production. Printing is largely done with solar power from our own 22 kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Frequently asked questions about the 300 Norma Magnum box


Do my reload cartridges fit?
The box is designed for CIP-compliant cartridges. Custom loads with longer overall length (long bullets, shallow seating depth) may be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it won’t open accidentally during transport. To open, release the catch with your finger; the lid then folds backward. Minor manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes, as an organization and storage box for the range bag. However, it is not a safety container according to WaffG/AWaffV and not a hazardous materials package.


Can the box withstand heat (e.g., summer trunk)?
Under normal room and cabinet storage, the box remains dimensionally stable. Like all PLA materials, it is not made for permanent heat – it should not be left for extended periods in a hot summer trunk (well above 50 °C).


What are the tolerances in 3D printing?
Manufacturing condi
ngt allows for slight tolerances. The cartridges still fit firmly in the slot – a minimal play remains by design, and unnecessary pressure on the bullet nose is avoided as much as possible.



No more loose cartridges
Choose the right size for 300 Norma Magnum – from the handy range box to the storage format for the cabinet.


Important notes: Delivery is without ammunition. This box is for organizing and transporting and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the required ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; trademark and name rights remain with the respective owners.