Filamelt ammunition box / 30-06 Springfield / 'folding / locking lid' / cartridge box, ammo box

Filamelt Ammo Box
Ammo box for 30-06 Springfield with flip/latch lid
Caliber-specific storage for 30-06 Springfield – precisely made and Made in Germany. No more loose cartridges and packaging chaos: a uniform system for the gun cabinet, range, and hunting grounds.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in stock · no import goods

Does this fit my ammunition?


Caliber
30-06 Springfield


Suitable for


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 30-06 Springfield ammunition?


Variant
Outer dimension
Weight
Purpose


25 cartridges
9.4 × 7.4 × 10.5 cm
171 g
Training unit


50 cartridges
15.8 × 7.4 × 11.0 cm
245 g
full training day


81 cartridges

385 g



Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 30-06 Springfield box special


Caliber-specific fit
Each slot is designed to the caliber according to CIP dimensions: the cartridges are held firmly, play and rattling are minimized as much as possible. Precisely constructed, not improvised.


Hinge lid with latch closure
The lid is attached at the back with a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely fitting insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the latch.


Stable & durable
Solid construction for continuous use – stable standing in the cabinet, well stored in the range bag, reusable instead of disposable packaging.


Caliber marking in multicolor print
The caliber designation is printed directly in multicolor on the box – permanent, without stickers or engraving. In a full gun cabinet, you immediately grab the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready to grab for range, hunting grounds, and range bag.


Made in Westerwald
We print every box here in Westerwald – no container import, no anonymous mass production. Printing is done largely with solar power from our own 22-kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Frequently asked questions about the 30-06 Springfield box


Do my reloads fit too?
The box is designed for CIP-compliant cartridges. Custom loads with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not open accidentally during transport. To open, release the latch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes. As a storage and organization box, it accompanies you in the range bag. However, it is not a security container according to WaffG/AWaffV and not an approved hazardous material packaging.


Can the box withstand heat (e.g., summer trunk)?
Under normal room and cabinet storage, the box remains dimensionally stable permanently. Like all PLA materials, it is not made for permanent heat – in a hot summer trunk (well over 50 °C) it should not be left for extended periods.
liegen.


What are the tolerances in 3D printing?
Due to manufacturing, slight tolerances are possible. The cartridges still fit firmly in the slot – a minimal play remains due to the design, and unnecessary pressure on the bullet nose is avoided as much as possible.



No more loose cartridges
Choose your capacity for 30-06 Springfield – from the small box for the range bag to the large box for storage.


Important notes: Delivery is without ammunition. This box is for organizing and transporting and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the legally required ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; trademark and name rights remain with the respective owners.