Filamelt ammunition box / 25 ACP / 'folding / latch lid' / cartridge box, ammo box

Filamelt Ammo Box / Ammo Box
Ammo box for 25 ACP with flip/latch lid
The 25 ACP box brings order to your ammunition: caliber-specific slots, multicolored printed front & lid, Made in Germany. No loose cartridges, no collection of manufacturer boxes – a uniform look for your gun cabinet, shooting range, and hunting grounds.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in stock · no imports

Does it fit my ammunition?


Caliber
25 ACP


Suitable for


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 25 ACP ammunition?


Variant
Outer dimension
Weight
For what


49 cartridges
9.4 × 7.4 × 4.9 cm
95 g


98 cartridges
15.8 × 7.4 × 4.9 cm
156 g



Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 25 ACP box special


Caliber-specific fit
Precisely fitting slots according to CIP standard dimension – each cartridge sits firmly in its place, minimizing play and rattling. The shape follows the caliber, not the drawer.


Hinge lid with latch closure
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely fitting insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the latch.


Stable & durable
Solid construction for continuous use – stable standing in the cabinet, well stored in the range bag, reusable instead of disposable packaging.


Caliber marking in multicolor print
The caliber marking is multicolored and directly integrated into the box print – permanent, without stickers or engraving. In a full gun cabinet, you immediately grab the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready to grab for range, hunting grounds, and range bag.


Made in Westerwald

Made in own production in Westerwald, piece by piece – instead of anonymous imports. The 3D printing runs largely on solar power from our own 22-kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Frequently asked questions about the 25 ACP box


Do my reloads fit too?
The box is designed for CIP-compliant cartridges. Own loadings with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the latch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes. As a storage and organization box, it accompanies you in the range bag. However, it is not a security container according to WaffG/AWaffV and not an approved hazardous materials packaging.


Can the box withstand heat (e.g., summer trunk)?
Yes, it remains dimensionally stable under normal storage. High continuous heat – like in a hot trunk in midsummer – is not suitable for PLA; the box is not intended for that.


What are the tolerances in 3D printing?
Small manufacturing tolerances are normal in 3D printing. This does not affect the firm seating of the cartridges;
a slight play remains due to the design, but the bullet nose is protected as much as possible.



No more loose cartridges
Grab the matching 25 ACP box – small for the range bag, large for stock in the gun safe.


Important notes: Delivery is without ammunition. This box is for organizing and transporting and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the required ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; brand and name rights remain with the respective owners.