Filamelt ammunition box / 22 Picra / 'folding / locking lid' / cartridge box, ammo box

Filamelt Cartridge Box / Ammo Box
Ammunition box for 22 Picra with flip/latch lid
The 22 Picra box brings order to your ammunition: caliber-specific slots, multicolor printed front & lid, Made in Germany. No loose cartridges, no collection of manufacturer boxes – a uniform look for your gun cabinet, shooting range, and hunting grounds.

✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no import goods

Does it fit my ammunition?

Caliber
22 Picra

Suitable for

Fit
caliber-specific slots according to CIP standard dimensions; minimizes play and rattling

All information according to official CIP data. If you notice an error, please let us know briefly.

Which size fits your 22 Picra ammunition?

Variant
External dimensions
Weight
For

72 cartridges
15.8 × 7.4 × 6.8 cm
184 g

144 cartridges
15.8 × 13.7 × 9.1 cm
366 g

External dimensions = assembled box (L × W × H). Delivery without ammunition.

What makes the 22 Picra box special

Caliber-specific fit
Slots designed according to CIP dimensions give each cartridge firm, defined hold – play and rattling are minimized. Constructed according to CIP standard dimensions for 22 Picra.

Hinged lid with latch closure
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely seated insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the catch.

Sturdy & durable
Thick walls, densely printed layers – the box holds reliably together in the gun cabinet, range bag, and on the go. Reusable, no disposable carton.

Caliber marking in multicolor print
The caliber designation is multicolor integrated directly into the box print – permanent, without stickers or engraving. In a full gun cabinet, you immediately grab the right box.

For sport shooters, hunters, and reloaders

Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready for range, hunting grounds, and range bag.

Made in Westerwald

We print every box here in Westerwald – no container import, no anonymous mass production. Printing is largely powered by solar energy from our own 22 kWp photovoltaic system. Material: Filamelt PLA+ 2.0.

Frequently asked questions about the 22 Picra box

Do my reload cartridges fit too?
The box is designed for CIP-compliant cartridges. Custom loads with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, please inquire in advance.

Will the lid pop open in the backpack?
No. A latch closure at the front keeps the hinged lid securely closed so it won’t accidentally open during transport. To open, release the catch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.

Are the boxes suitable for transport?
Yes, as an organizing and storage box for the range bag. However, it is not a safety container according to WaffG/AWaffV and not a hazardous materials packaging.

Can the box withstand heat (e.g. summer trunk)?
Yes, it remains dimensionally stable under normal storage. High continuous heat – like in a hot car trunk in midsummer – is not suitable for PLA; the box is not intended for that.

What are the tolerances in 3D printing?
Small manufacturing tolerances are normal in 3D printing. This does not affect the firm hold of the cartridges; a ge
A small residual play remains due to the design, and the bullet nose is protected as much as possible.



No more loose cartridges
Choose your capacity for 22 Picra – from the small box for the range bag to the large box for storage.


Important notes: Delivery is without ammunition. This box is for organization and transport and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the legally required ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; trademark and name rights remain with the respective owners.