Fluna Tec Weapon Care Set No. 1

Fluna Tec Gun Care Set No. 1 - The complete set for gun care: clean, lubricate and protect in one step

Complete gun care solution – everything you need for cleaning, protection and longevity in one set.
Protection against wear and corrosion – helps maintain your firearm’s functionality and service life.
Quick and easy to use – professional care with minimal effort.
Suitable for all types of firearms – whether hunting, sport or service firearms.
Maximum precision and reliability – a well-maintained firearm simply works better.

Give your firearm the care it deserves.

Clean, lubricate and protect – with a set that does most of the work for you.
Simple, effective and reliable.
FLUNA GUN COATING AEROSOL (gun coating)

From now on, use Flunatec’s high-performance ceramic coating to care for your firearm.
Firearms and knives are protected by a thin, economical-to-apply film; moving parts keep running smoothly – dry and without the drawbacks of conventional gun oil.
FLUNA GUN DEGREASER (gun degreaser)

Gun cleaning made easy: this special cleaner and degreaser quickly and completely removes oils, grease and wax, as well as powder residue and combustion deposits.
The Fluna gun degreaser in its handy bottle is suitable for cleaning by hand and in an ultrasonic bath.
LINT-FREE MICROFIBER CLOTH

Use the microfiber cloth included in the set to clean all parts of your firearm and achieve a streak-free, shiny finish.
After use, simply machine-wash the microfiber cloth at 60 °C without fabric softener.
Note:

Regular care: For stored firearms, it’s recommended to renew the coating every two to three months. For firearms used regularly, care should be carried out after each use.
Compatibility: Fluna Gun Coating can be used on all cleaned and degreased surfaces, including steel, plastic, painted wood, rubber and precious-metal embellishments.
Microfiber cloth care: After use, machine-wash the microfiber cloth at 60 °C without fabric softener to avoid damaging the fibers.

Set contents:

Fluna Gun Degreaser (FLUNA gun degreaser) (100 ml)
Fluna Gun Coating Aerosol (FLUNA gun coating) (100 ml)
Microfiber cloth (32 x 32 cm)

Instructions:

Cleaning with Fluna Gun Degreaser:

Preparation: Disassemble the firearm into its main components according to the manufacturer’s instructions.
Application: Spray the gun degreaser evenly onto all firearm surfaces to be cleaned.
Leave to work: Let the cleaner work briefly to dissolve oils, grease, wax, powder residue and combustion deposits.
Cleaning: Use the included microfiber cloth to wipe away loosened dirt. A soft brush can help with stubborn deposits.
Drying: Make sure all parts are completely dry before moving on to the next step.

Coating with Fluna Gun Coating Aerosol:

Application: Shake the Fluna Gun Coating spray can well. Hold the can about 20 cm from the surface and spray the product evenly onto all metal and moving parts of the firearm.
Spread: Use the microfiber cloth to spread the coating evenly and remove any excess product.
Leave to dry: Let the coated parts dry at room temperature for about 30 minutes. The coating will be fully cured after about 2 hours, and the firearm will be ready to use again.

Finishing:

Reassembly: Reassemble the firearm according to the manufacturer’s instructions.
Function check: Check that the firearm functions properly and make sure all parts are correctly installed.

Other: continue
e Information at https://hunting-equipment.de/fluna-tec-waffenpflege-set-nr-1.html
Product safety information:Manufacturer
Fluna Tec & Research GmbH
Dr. Hans Lechnerstraße 6
A-5071 Wals
Austria
[email protected]

EU responsible person
Fluna Tec & Research GmbH
Dr. Hans Lechnerstraße 6
A-5071 Wals
Austria
[email protected]