B&T Print-X RBS FullSize 7.62 / .30, INCONEL CERAKOTE Black M.A.R.S. *Clearance*

Available directly from stock with us. Please pay attention to the respective delivery time indication (Delivery time 1 to 2 days = in stock with us).---Now newly available as Generation 2! The difference is the significantly reduced muzzle flash. The Print-X Gen2 for caliber 7.62 has a larger diameter of 50mm and weighs slightly more. The images still show Gen1 with the smaller diameter!---The B&T Print-X RBS Standard (Fullsize) suppressor is part of the large suppressor family of the renowned Swiss manufacturer and the latest development using state-of-the-art laser sintering manufacturing processes. The suppressors of the Print-X line are made of Inconel, a high-temperature resistant nickel-iron alloy, or titanium, allowing these suppressors to withstand fully automatic shooting - all suppressors of the Print-X RBS line are tested to military standards and can endure a high volume of fire without damage, and are currently the only 3D-printed suppressors that meet strict military requirements.

The Print-X designed for MSR (Modern Sporting Rifle) and authorities is available in 3 sizes: Full Size, Compact & Sub-Compact. The diameter is the same for all 3 models - 44mm for Gen 1 and 50mm for .30 Gen2 - only the length varies. Accordingly, the more compact models have slightly lower suppression performance than the standard model.

These suppressors are offered by us as standard with RBS - Reduced Back Pressure. This technology creates less back pressure in the suppressor and is also known as "flow," "high flow," or "flow through." A suppressor with this technology works with semi-automatic rifles without an adjustable gas block because the bolt speed is not, or only marginally, increased. However, such a suppressor is somewhat louder, or does not suppress the sound as effectively, since part of the gases is diverted forward for pressure reduction. The burden on the shooter is significantly lower, which is a considerable positive health factor, especially in closed ranges.

ALL models are delivered with glued adapters! The connection is to be considered non-detachable. If you wish for a different configuration, please contact us before placing your order!

Available in 5 different mounting systems:

Rotex IIA

QDR
B&T's own system
classic and proven


NATO

QDN
Rotex-X closure is the successor to Rotex-III & Rotex-V
easier to operate than its predecessors
very widely used, works with all NATO muzzle flash suppressors and brakes
fits the classic A2 Birdcage Flashhider


M.A.R.S.

QDM
B&T's new proprietary system
one-handed operation
very light and compact


BoreLock

QDAU
from AseUtra
known and proven
widely used
one-handed operation
Available in 5 different mounting systems:

NATO

QDN
Rotex-X closure is the successor to Rotex-III & Rotex-V
easier to operate than its predecessors
very widely used, works with all NATO muzzle flash suppressors and brakes
fits the classic A2 Birdcage Flashhider


M.A.R.S.

QDM
B&T's new proprietary system
one-handed operation
very light and compact

The following versions are only available as individual parts, i.e., body and adapter separately:

Rotex IIA

QDR
B&T's own system
classic and proven


BoreLock

QDAU
from AseUtra
known and proven
widely used
one-handed operation


Surefire

QDSF
widely used in the USA, rare here
similar to Rotex-IIA, slightly older but proven

Coated with Cerakote, the offered variant is available in "Armor Black." For versions with Cerakote coating, k
ann die Farbechtheit nach hohen Schussbelastungen NICHT garantiert werden! Wenn der Schalldämpfer kurz vor dem Glühen ist, wirkt sich das natürlich auf die Oberfläche aus.

Bitte beachten:

Alle Systeme benötigen eine entsprechende Mündungsbremse bzw. Mündungsfeuerdämpfer. Bei den Print-X aus Inconel besteht der Adapter aus beschichteten rostträgen Stahl, bei den Print-X aus Titan besteht der Adapter ebenfalls aus Titan.
Die BoreLock Variante benötigt den Zahnkranz und funktioniert daher NICHT auf den Mündungsaufsätzen von Silent Steel oder ähnlichen Modellen ohne Zahnkranz.
 

Produktdetails:

B&T Print-X RBS

up to caliber .223 Remington / 5.7mm FN or .308 Win. / .300 Blackout / 7.62x39 / etc.


Generation 2 with significantly reduced muzzle flash 3D printed using laser sintering
monolithic, i.e. the suppressor body consists of one part

not disassemblable


Material: Inconel

high-temperature resistant nickel-iron alloy


Selection according to mounting system, see above
"Reduced Back Pressure"

no back pressure in the system
usable without adjustable gas block


Suppression performance: approx. 28dB(A)
Color: Cerakote Black, Armor Black
Full Auto rated
Dimensions, without adapter Gen1: 168x44mm Gen2: 168x50mm
Weight, depending on adapter:

NATO Gen1: 665g M.A.R.S. Gen1: 525g

Die Schweizer Firma B&T AG (ehemals Brügger & Thomet) besteht seit 1991. Ursprünglich für Ihre Schalldämpfer bekannt, entwickelt B&T aufgrund behördlicher und militärischer Nachfragen auch passende Montagen, Handschütze, Griffe für verschiedenste Waffensysteme. Die hohe Qualität und Robustheit ihrer Produkte fanden weltweit Zuspruch, sodass es letztendlich zur Entwicklung eigener Waffensysteme kam. Die zuverlässigen Selbstladegewehre, die zuerst für Behördliche Verwendung Ihren Dienst antraten, sind nun auch für den zivilen Markt erhältlich.

Abgabe nur an Inhaber einer Erwerbsberechtigung.

Achtung: Dieser Artikel unterliegt Ausfuhrbestimmungen und kann ausschließlich innerhalb Deutschlands erworben werden. KEIN Auslandsversand!