B&T Print-X RBS Compact 5.7 / .223, INCONEL Cerakote Black M.A.R.S. *Clearance*

Available from stock with us. Please pay attention to the respective delivery time indication (Delivery time 1 to 2 days = directly in stock with us).---Now newly available as Generation 2! The difference is the significantly reduced muzzle flash. The Print-X Gen2 for caliber 5.56 has unchanged dimensions and weight.---
The B&T Print-X RBS Compact silencer is part of the large silencer family of the renowned Swiss manufacturer and the latest development using state-of-the-art laser sintering manufacturing processes. The silencers of the Print-X line are made of Inconel, a high-temperature resistant nickel-iron alloy, or titanium, allowing these silencers to withstand fully automatic shooting - all silencers of the Print-X RBS line are tested to military standards and can endure high volumes of fire without damage, and are currently the only 3D-printed silencers that meet strict military requirements.

The Print-X designed for MSR (Modern Sporting Rifle) and authorities is available in 3 sizes:
Full Size, Compact & Sub-Compact. The diameter is the same for all 3 models - 44mm for Gen 1 and 50mm for .30 Gen2 - only the length varies. Accordingly, the more compact models have slightly lower attenuation performance than the standard model.

These silencers are offered by us as standard with RBS - Reduced Back Pressure. This technology creates less back pressure in the silencer and is also known as "flow", "high flow" or "flow through". A silencer with this technology works with semi-automatic rifles without an adjustable gas block, as the bolt speed is not, or only marginally, increased. However, such a silencer is somewhat louder, or does not suppress the bang as strongly, since part of the gases is diverted forward for pressure reduction. The burden on the shooter is significantly lower, which is an important positive health factor, especially in closed ranges.

ALL models are delivered with glued adapters!
The connection is to be considered non-removable. If you wish for a different configuration, please contact us before placing your order!

Available in 5 different mounting systems:

NATO

QDN
Rotex-X closure is the successor of Rotex-III & Rotex-V
easier to use than its predecessors
very widely used, works with all NATO muzzle flash suppressors and brakes
fits the classic A2 Birdcage Flashhider


M.A.R.S.

QDM
B&T's new proprietary system
operable with one hand
very light and compact

The following versions are only available as individual parts, i.e., body and adapter separately:

Rotex IIA

QDR
B&T's proprietary system
classic and proven


BoreLock

QDAU
from AseUtra
known and proven
widely used
operable with one hand


Surefire

QDSF
widely used in the USA, rare here
similar to Rotex-IIA, somewhat older but proven

Coated with Cerakote, the offered variant is available in "Armor Black" or "Coyote Tan".
For versions with Cerakote coating, color fastness after high shooting loads CANNOT be guaranteed! If the silencer is close to glowing, this naturally affects the surface.

Please note:
All systems require a corresponding muzzle brake or muzzle flash suppressor. For the Print-X made of Inconel, the adapter is made of rust-resistant steel, while for the Print-X made of titanium, the adapter is also made of titanium.
The BoreLock variant requires the tooth ring and therefore does NOT work on the muzzle attachments of Silent Steel or similar models without a tooth ring.

Product details:

B&T Print-X RBS Compact

up to caliber .223 Remington / 5.7mm FN

Generation 2 with significantly reduced muzzle flash.
ndungsfeuer3D printed using the laser sintering process
monolithic, i.e. the suppressor body consists of one piece

not disassemblable

Material: Inconel

high-temperature resistant nickel-iron alloy

Selection according to mounting system, see above
"Reduced Back Pressure"

no back pressure in the system
usable without adjustable gas block

Suppression performance: approx. 24dB(A)
Color: Cerakote Black / Armor Black Coyote Tan
Full Auto rated
Dimensions, without adapter 128x44mm Weight, depending on adapter:

NATO Gen1: 595g (.223 Rem.) M.A.R.S. Gen1: 455g (.223 Rem.)

The Swiss company B&T AG (formerly Brügger & Thomet) has been in existence since 1991. Originally known for its suppressors, B&T also develops suitable mounts, handguards, grips for various weapon systems due to governmental and military inquiries. The high quality and robustness of their products gained worldwide acceptance, leading to the development of their own weapon systems. The reliable self-loading rifles, which first served for governmental use, are now also available for the civilian market.

Sale only to holders of a purchase permit.

Attention: This item is subject to export regulations and can only be purchased within Germany. NO international shipping!