B&T Print-X RBS Compact 7.62 / .30, INCONEL M.A.R.S. *Discontinued model*

Ab in stock. Please pay attention to the delivery time indication: 1-2 days = in stock.

---Now newly available as Generation 2! The difference is the significantly reduced muzzle flash. The Print-X Gen2 for caliber 7.62 has a larger diameter of 50mm and weighs accordingly a bit more.---The B&T Print-X RBS Compact silencer is part of the large silencer family of the renowned Swiss manufacturer and the latest development using state-of-the-art laser sintering manufacturing processes. The silencers of the Print-X line are made of Inconel, a high-temperature resistant nickel-iron alloy, or titanium, allowing these silencers to withstand fully automatic shooting - all silencers of the Print-X RBS line are tested to military standards and can endure a high volume of fire without damage and are currently the only 3D-printed silencers that meet strict military requirements.

The Print-X designed for MSR (Modern Sporting Rifle) and authorities is available in 3 sizes:
Full Size, Compact & Sub-Compact. The diameter is the same for all 3 models - 44mm or 50mm depending on the generation - only the length varies. Accordingly, the more compact models have slightly lower suppression performance than the standard model.

These silencers are offered by us as standard with RBS - Reduced Back Pressure. This technology creates less back pressure in the silencer and is also known as "flow", "high flow" or "flow through". A silencer with this technology works with semi-automatic rifles without an adjustable gas block, as the bolt speed is not, or only marginally, increased. However, such a silencer is somewhat louder, or does not suppress the noise as strongly, since part of the gases is diverted forward for pressure reduction. The burden on the shooter is significantly lower, which is a considerable positive health factor, especially in closed ranges.

ALL models are delivered with glued adapters!
The connection is to be considered non-detachable. If you wish for a different configuration, please contact us before placing your order!

Available in 5 different mounting systems:

NATO

QDN
Rotex-X closure is the successor of Rotex-III & Rotex-V
easier to use than its predecessors
very widely used, works with all NATO muzzle brakes and flash hiders
fits the classic A2 Birdcage Flashhider

M.A.R.S.

QDM
B&T's new proprietary system
can be operated with one hand
very light and compact

The following versions are only available as individual parts, i.e., body and adapter separately:

Rotex IIA

QDR
B&T's proprietary system
classic and proven

BoreLock

QDAU
from AseUtra
known and proven
widely used
can be operated with one hand

Surefire

QDSF
widely used in the USA, rare here
similar to Rotex-IIA, a bit older but proven

Please note:
All systems require a corresponding muzzle brake or muzzle flash suppressor. For the Print-X made of Inconel, the adapter is made of rust-resistant steel; for the Print-X made of titanium, the adapter is also made of titanium.
The BoreLock variant requires the tooth ring and therefore does NOT work on the muzzle attachments of Silent Steel or similar models without a tooth ring.

Product details:

B&T Print-X RBS Compact

Caliber .308 Win./.300 BLK / 7.62x39 / etc.

3D printed using laser sintering
monolithic, i.e., the silencer body consists of one piece

not disassemblable

Material: Inconel

high-temperature resistant nickel-iron alloy
sandblasted, matte silver

Selection according to mounting system, see above
"Reduced Back Pressure"

no back pressure in the system
usable without adjustable gas block
llbare Gasabnahme

Dämpfungsleistung: ca. 24dB(A)
Material: Inconel
Full Auto rated Generation 2 mit deutlich reduzierten Mündungsfeuer
Maße, ohne Adapter Gen1: 128x44mm Gen2: 128x50mm
Gewicht:

NATO Gen1: 590g M.A.R.S. Gen1 : 450g

Die Schweizer Firma B&T AG (ehemals Brügger & Thomet) besteht seit 1991. Ursprünglich für Ihre Schalldämpfer bekannt, entwickelt B&T aufgrund behördlicher und militärischer Nachfragen auch passende Montagen, Handschütze, Griffe für verschiedenste Waffensysteme. Die hohe Qualität und Robustheit ihrer Produkte fanden weltweit Zuspruch, sodass es letztendlich zur Entwicklung eigener Waffensysteme kam. Die zuverlässigen Selbstladegewehre, die zuerst für Behördliche Verwendung Ihren Dienst antraten, sind nun auch für den zivilen Markt erhältlich.

Abgabe nur an Inhaber einer Erwerbsberechtigung.

Achtung: Dieser Artikel unterliegt Ausfuhrbestimmungen und kann ausschließlich innerhalb Deutschlands erworben werden. KEIN Auslandsversand!