ERA SILENCER Silencer SOB3D .224 - .375 .30

Order here directly → →ERA SILENCER suppressor SOB3D .224 - .375 .30 caliber.30Product descriptionNoise reduction value 33 dBexcellent damping performance due to integrated stainless steel meshsuper short and light - the firearm remains very handyextended by 105 mmvarious calibers & thread types availableERA® SILENCER SOB3D - the efficient oneThe ERA® SILENCER was developed with the goal of achieving the best possible damping with a compact design and minimal weight - and this with full magnum suitability and long service life.The most important requirement for a suppressor in hunting use is the most effective damping of the muzzle blast to protect the hearing of humans and dogs.The suppressors of the SOB series are designed as telescopic suppressors (over-barrel). In this design, part of the suppressor extends backward over the barrel, allowing very good damping values with a short net length. Additionally, the usual first-round pop found in other suppressors is reduced to an absolute minimum. Recoil and muzzle flash are also significantly reduced.The ERA® SILENCER can be easily disassembled: the thread inserts are replaceable. By exchanging the thread insert, the ERA® SILENCER can also be used on other firearms of the same caliber but with different barrel threads. Also included is a protective cap mounted at the rear end of the over-barrel suppressor. It protects the barrel thread and suppressor from damage caused by lateral forces and prevents dirt and snow from entering.The surface structure significantly reduces powder residue adhesion inside the suppressor. Externally milled longitudinal grooves provide the necessary grip during mounting and ensure faster cooling.The stepped design protects the sealing rings, as no contact with powder residues in the outer tube occurs during disassembly. A coating according to MIL-SPEC MIL-A-8625F Type III meets the highest requirements for hardness and corrosion resistance.This makes the ERA® SILENCER highly advantageous and excellently equipped to withstand everyday hunting use.10 reasons for the ERA® SILENCER high damping performance - SOB 3D up to 33 dB no "first-round pop" - the so-called "first-round pop" effect is neutralized by the ERA® SILENCER through its specially designed baffle section short net length due to telescopic design - SOB 3D net length 105 mm low weight - SOB 3D 326 g incl. ERA®LOC thread insert reduced recoil - the particularly large number of baffles significantly reduces recoil low muzzle flash - muzzle flash is almost completely redirected inside the suppressor, greatly reducing glare for the shooter replaceable thread insert - the replaceable thread insert allows the ERA® SILENCER to be easily used on other firearms of the same caliber with different barrel threads stepped geometry: low wear on sealing rings - the stepped design prevents damage to the sealing rings by avoiding any contact with powder residues in the outer tube during disassembly surface coating according to MIL-SPEC - meets highest standards for hardness and corrosion resistance magnum suitable - high-strength aluminum alloys and solid wall thicknesses allow use even with magnum calibers ERA®LOC versionThe suppressor is optionally also available with the ERA®LOC quick release. When ordering the ERA®LOC version, the matching ERA®LOC barrel thread insert is additionally required.The ERA®LOC quick release enables quick and easy mounting and dismounting of the suppressor with just a short 60° turn. The very robust thread ensures secure hold due to the high number of thread turns.
pfers. The ERA®LOC thread itself is protected from powder residues by the contact on the front face and guarantees consistent and safe function.Technical data:Attenuation value: 33 dBTotal length: 165 mmExtended by approx. 105 mmBarrel overhang: 60 mmSuppressor Ø: 50 mmBarrel Ø: max. 22.5 mmWeight: 326 gFor the matching .AttentionThe ERA® SILENCER are designed for hunting use in the field, but not for rapid consecutive shooting series, such as in a shooting range. After series of a maximum of 10 shots, the suppressor must cool down enough to be touched with bare hands!Notes on suppressorsBallistically, the use of suppressors with normal usual hunting ammunition has no effect – the bullet's performance remains the same. The perception of the surroundings is also not affected. Suppressors reduce recoil as well as noise at the source. This also protects the environment (e.g. hunting dogs) from noise damage. They almost completely reduce muzzle flash, so that in poor light the aiming and flight direction of the game can be better perceived. Before cycling the firearm, the suppressor should always be removed to avoid damage to the baffles. Likewise, the firearm should always be stored without a mounted suppressor to minimize corrosion in the barrel. For cleaning and preserving suppressors, penetrating oils are recommended. For thread care, high-temperature resistant greases prove effective. Order here directly → →ERA SILENCER suppressor SOB3D .224 - .375 .30
Product safety information:This product was made available on the marketplace before 13.12.2024. For manufacturer and safety information, please contact the offering dealer.
WARNING: Proof of acquisition authorization is required to purchase this product!!!