Cold spray freeze 400 ml PETEC cools down to -45°C

PETEC cold spray for troubleshooting in electronic areas as well as for cooling construction parts, such as bearings, shafts, bushings, keyways, chain links, carburetor and injection systems, transistors, resistors, and other parts with tight fits. Also suitable for cooling heavily heated parts. Cools components within a few seconds for maintenance and adjustment work cools down to –45°C residue-free silicone and grease-free Instructions for use Shake can well before use. Spray components evenly with PETEC cold spray. The cooling effect depends on the spray duration. Do not spray on body parts. Observe safety and technical data sheet! Signal word: Danger H222: Extremely flammable aerosol H229: Container is under pressure: May burst if heated P102: Keep out of reach of children. P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. P211: Do not spray on an open flame or other ignition source. P251: Do not pierce or burn, even after use. P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F. P101: If medical advice is needed, have product container or label at hand. P501: Dispose of contents/container in accordance with local/national regulations.