Power Glue 3g PETEC Instant Adhesive

Seconds-fast curing one-component adhesives for permanent connections. super fast adhesion and curing within seconds easy application very high strength clean bonding immediate further processing possible Application area: Bonds materials such as metal, plastic, rubber, felt, PVC, leather, wood, ceramics, etc. – with and among each other. Base Ethyl-Cyanoacrylate Colors Transparent Functional strength (seconds) 1 – 10 Shelf life (months) 18 months Gap bridging (mm) 0.05 Temperature resistance (°C) –40 - +85 Tensile shear strength (N/mm²) 15 – 25 Instructions for use: Processing temperature: +5°C to +30°C. Thoroughly clean and degrease surfaces with PETEC Multi Cleaner (Art.-No. 82100 or 82200). For low-energy plastics, we recommend using a plastic primer (Art.-No. 98315) for adhesion promotion. Apply POWER adhesive thinly on one side. Fit the parts to be bonded precisely together and press firmly. Due to the rapid chemical reaction, white residues may occur on the surface. Post-processing (e.g. sanding, painting) is only possible after the adhesive has cured. Solvent-based paints and other media can block or destroy the curing. For faster curing, we recommend our Speed-Bond Activator Spray (Art.-No. 93515). Due to the variety of applications, materials, and other influencing factors, a self-test and suitability check is required. Contains: Contains: Ethyl-2-cyanoacrylate, 1,4-Dihydroxybenzene. Signal word: Warning H335: May cause respiratory irritation. H319: Causes serious eye irritation. EUH202: Cyanoacrylate. Danger. Bonds skin and eyelids together in seconds. Keep out of the reach of children. H315: Causes skin irritation. EUH208: May cause allergic reactions.