Screw Locking Super Strong 5 g PETEC

quick anaerobic curing super strong bond – very difficult to disassemble reliably secures cylindrical parts as well as fine, medium, and coarse threads resistant to corrosion, vibration, water, saltwater, oil, fuel, coolant, and many other chemicals Application area: For securing and sealing joints such as bearings, bushings, shafts, bolts, and many other cylindrical parts as well as threaded connections like screws, nuts, etc.   Colors Green Curing time (hours) 2 - 4 Curing system anaerobic Functional strength (hours) 1 – 3 Thread size up to M20 Hand strength (minutes) 2-5 Shelf life (months) 36 months Breakaway torque (Nm) 30 – 35 max. Gap filling capacity (mm) 0.15 Shear strength (N/mm²) 20 – 30 Temperature resistance (°C) –55 - +175 Viscosity (Pa·s) 500   Instructions for use: Processing temperature: +5°C to +35°C. Thoroughly clean and degrease the screw connection with PETEC Multi Cleaner (Art.-Nr. 82100 or 82200). Apply PETEC thread locker unilaterally and screw together immediately. Tighten the threaded connection to the specified torque. *The anaerobic curing occurs in the absence of air between metallic surfaces. For passive surfaces, large gap widths, low ambient temperatures, and faster curing, we recommend PETEC Activator anaerobic (Art.-Nr. 90920). Due to the variety of applications, materials, and other influencing factors, a self-test and suitability check are required. For faster curing at low processing temperatures (below +5° C), large gaps, as well as for stainless steel and non-metallic parts, we recommend PETEC Activator for anaerobic adhesives and sealants (Art.-Nr. 90920). Anaerobic curing: Cures only between two metallic surfaces in the absence of oxygen.     Contains: Acrylic acid (2,4,6-trioxo-1,3,5-triazin-1,3,5(2H,4H,6H)-triyl)tri-2,1-ethanediyltriacrylate 2-Hydroxyethylmethacrylate Cumene hydroperoxide Signal word: Danger H315: Causes skin irritation. H317: May cause allergic skin reactions. H318: Causes serious eye damage. H335: May cause respiratory irritation. H412: Harmful to aquatic organisms with long-lasting effects.