Silencer RECKNAGEL GmbH & Co. KG SOB1 - caliber .224 (ERA LOC) without

PRODUCT DESCRIPTION
Damping value: 32 dB
Extended by 145 mm
Especially suitable for Magnum calibers
Various calibers & thread types available
ERA® SILENCER SOB1 – the Powerful One
The ERA® SILENCER was developed with the goal of achieving the best possible damping with a compact design and minimal weight – all while being fully suitable for Magnum use and ensuring a long lifespan.
The most important requirement for a silencer in hunting use is to achieve the most effective damping of the muzzle blast to protect the hearing of both humans and dogs.
The suppressors of the SOB series are designed as telescopic silencers (Over-Barrel). A part of the suppressor extends backward over the barrel, allowing for very good damping values to be realized with a short net length. Additionally, the typical first-shot noise common in other silencers is reduced to an absolute minimum. Recoil and muzzle flash are also significantly minimized.
The ERA® SILENCER can be easily disassembled: the thread bushings are interchangeable. By replacing the thread bushing, the ERA® SILENCER can also be used on other firearms of the same caliber but with different barrel threads. Also included is a protective shield that is mounted at the rear end of the Over-Barrel suppressor. It protects the barrel thread and the suppressor from damage due to lateral forces and prevents the ingress of dirt and snow.
The surface structure ensures significantly less adherence of powder residues inside the suppressor. Externally milled longitudinal grooves provide the necessary grip during assembly and allow for faster cooling. The stepped design protects the O-rings, as there is no contact with powder residues in the outer tube during disassembly. A coating according to MIL-SPEC MIL-A-8625F Type III meets the highest requirements for hardness and corrosion resistance.
Thus, the ERA® SILENCER offers numerous advantages and is excellently equipped to withstand everyday use in hunting.
10 Arguments for the ERA® SILENCER

High damping performance – SOB1 up to 32 dB
"First-round-pop" minimized – the effect known as "first-shot noise" or "first-round-pop" is reduced to a minimum by the ERA® SILENCER through its specially designed baffle component
Short net length due to telescopic design – SOB1 net length 145 mm
Low weight – SOB1 387 g
Reduced recoil – due to the particularly large number of baffles, recoil is significantly reduced
Low muzzle flash – the muzzle flash is almost completely redirected into the suppressor interior, thus significantly reducing the flash effect on the shooter
Interchangeable thread bushing – the ERA® SILENCER can easily be used on other firearms of the same caliber with different barrel threads due to the interchangeable thread bushing
Step geometry: Low wear on O-rings – the stepped design prevents damage to the O-rings, as any contact with powder residues in the outer tube is avoided during disassembly
Surface coating according to MIL-SPEC – meets the highest requirements for hardness and corrosion resistance
Magnum-compatible – high-strength aluminum alloys and solid wall thicknesses allow use even with Magnum calibers

ERA®LOC Version
The silencer is optionally available with the ERA®LOC quick-release. When ordering the ERA®LOC version, you also need the appropriate barrel thread bushing.
The ERA®LOC quick-release allows for the fast and easy attachment and detachment of the silencer with just a short 60° turn. The very robust thread ensures a secure hold of the silencer due to the high number of thread turns. The ERA®LOC thread itself is protected from powder residues by the contact at the front side and guarantees consistent and secure function.
Product Safety Information:
Manufacturer: Recknagel G
mbH & Co. KG Landwehr 497493 Bergrheinfeld, DE 09721 94810-0 [email protected] EU Responsible Person Recknagel GmbH & Co. KG Landwehr 497493 Bergrheinfeld, DE 09721 94810-0 [email protected] ACHTUNG: To purchase this product, the presentation of the acquisition authorization is required !!!