SHIELD Reflex Mini Sight 2.0 RMS 2 , 4 MoA with glass lens

Available from stock with us. Please pay attention to the respective delivery time indication.

The compact and lightweight red dot sights from the brand "Shield Sights" have set the standard for the smallest and most robust "Mini Sights" for authorities and the civilian market since the 1990s. The original Shield Mini Sight (SMS) with a polymer lens is still in production, but the portfolio has been continuously expanded in recent years. The Reflex Mini Sight (RMS) with an aluminum housing was introduced in 2016, followed by the compact RMSc in 2018.

Most Mini Sight models are available with either a polymer lens (higher shock resistance) or a glass lens (higher scratch resistance). All Mini Sights use the common lithium CR2032 batteries with a lifespan of 2-3 years under normal use and 4 years or more with frequent storage of the weapon in a safe.

RMS 2

The further development of the RMS forgoes the side battery compartment to increase stability and in favor of revised electronics but otherwise uses the same compact dimensions and simple operation as the RMS.

4 MOA dot

The LEDs provide either a red 4 or 8 MoA dot, the Mini Sight is ALWAYS on with automatic brightness control and offers a brightness intensity that allows use with night vision devices at the lowest setting and enables use on bright summer days at the highest setting - according to the manufacturer: "Visible against the sky in bright daylight."

ALL Shield Sights, regardless of series and design, use the same extremely compact "footprint" introduced by the company 30 years ago, for which there is a wide range of adapter plates, including those made in-house, and also specially prepared weapons. Due to the low height, co-witnessing with the standard sights on many weapons is possible, depending on the adapter plate.

Scope of delivery:

Shield Sight RMS 2 - "Reflex Mini Sight 2.0"
2x M4x8mm & 2x M4x10mm screws
Key for mounting and adjusting the point of impact
Crosshair plate for adjusting the point of impact
1° washer for coarse adjustment of the point of impact
CR2032 battery

Product details:

RMS 2 - for compact pistols, "Everyday Carry" and long guns
Parallax-free
4 MoA dot, red
Glass lens or polymer lens
Aluminum housing
2-3 years battery life in normal operation, >4 years with frequent storage in a safe
Shield Sight footprint (SMS, RMS)
Automatic brightness adjustment with a very large adjustment range, night vision compatible
Battery: CR2032
Battery compartment under the sight
Dimensions (LxWxH): 42x25x23mm
Weight: 17.5g including battery

Shield International was founded in 1983 in the USA and originally dealt with special solutions for sports shooters as well as military and authorities. The expertise of the company and its founder and experienced IPSC shooter Jeremy White led to the development of the Shield Mini Sights in 1996, introduced at that time as "Firepoint." From 1998, this sight was manufactured in larger quantities as "Tasco Optima." Smith & Wesson then jumped on the bandwagon, and Docter also used the concept with a slightly modified footprint. Over the years, the number of units in military and law enforcement applications also grew, especially special forces were enthusiastic about the mini reflex sights. After successes with military contracts and rebranding their own technology, Shield International began to focus more on the civilian market from 2014 onwards and today successfully sells some of the smallest and most robust sights on the market under its own name.

Attention: This product contains very small and/or button batteries.

Improper handling of batteries can lead to significant injuries or even death within just 2 hours, especially in young children (e.g., chemical burns).
and possible perforation of the trachea). If you suspect swallowing a battery, please seek a doctor immediately. Keep batteries out of the reach of children and dispose of empty or defective batteries promptly in accordance with local disposal regulations.
General usage instructions: Always insert batteries correctly (+/-), risk of injury from fire, explosions, or leaks, do not disassemble, charge, crush, expose to fire or high temperatures.

Note: Battery and Electrical Act (§ 18 BattG in conjunction with § 10 para. 1 ElektroG)