MDT Long Range Arms SEND-IT MV3

Currently sold out.

The MDT LRA Send iT MV3 is an electronic level that allows the shooter to control the alignment of the weapon without taking their eye off the scope. This greatly increases precision in long-range shooting, as it prevents canting of the weapon, and thus movement of the point of impact in relation to the target point. The original Send iT Electronic Level was designed in 2016 by a few friends who founded the company Long Range Arms after realizing that it would be quite beneficial not to have to divert one's gaze from the scope to check the inclination of the weapon with a corresponding bubble level.

The principle of the aid is quite simple – an electronic tilt sensor detects whether the device – and thus the weapon – is canted and indicates this via 5 LEDs. 2 blue LEDs indicate whether the weapon is tilting to the right and 2 red LEDs indicate whether the weapon is tilting to the left. A green LED in the center lights up when the weapon is perfectly upright. The LEDs can be adjusted in brightness, making it possible to recognize them "out of the corner of the eye" under all lighting conditions without taking the gaze away from the target and scope.

The Send iT MV3 comes factory pre-calibrated and is thus ready for use "out of the box." However, the end user can also perform a subsequent calibration. Additionally, it is possible to adjust the sensitivity of the sensor in 5 levels – depending on shooting distance and personal preference. The sensor measures across a total of 12 axes, ensuring proper function regardless of the angle at which it is shot. The pre-installed Picatinny mount for use on the left side of the weapon can be converted for use on the right side, and with an additional adapter, a vertical alignment of the device is also possible.

Product details:

MDT LRA SendiT MV3

electronic level

prevents canting of the weapon
for Picatinny / NAR & Weaver

requires approx. 8mm x 21mm (HxT)

over 100h battery life

automatic sleep mode with motion sensor
tool-free battery replacement, CR1/3N button cell

adjustable brightness
sensitivity adjustable in 5 levels
factory calibrated

can be used immediately

subsequent calibration possible

MDT was founded with the goal of providing competitive shooters with a functional and affordable chassis for their bolt-action rifles. The result was the now legendary TAC21 stock system for the Remington 700. The range has since steadily grown and includes several stocks and stock accessories such as bipods, attachments, and magazines, etc. MDT offers custom solutions for firearm manufacturers and is part of the OEM equipment for dozens of firearm models.

Warning: This product contains very small and/or button batteries.

Improper handling of batteries can lead to significant injuries or even death within just 2 hours, especially in young children (e.g., chemical burns and possible perforation of the trachea). If you suspect that a battery has been swallowed, please seek medical attention immediately. Keep batteries out of the reach of children and dispose of empty or defective batteries promptly in accordance with local disposal regulations.
General usage note: Always insert batteries correctly (+/-), risk of injury from fire, explosions, or leaks, do not disassemble, charge, crush, expose to fire or high temperatures.

Note: Battery and Electrical Law (§ 18 BattG in conjunction with § 10 Abs. 1 ElektroG).