PGD Soft Ballistic Insert for Plate Carrier

Available directly from stock.

No government certification required.

This soft ballistic insert from PGD can be used in plate carriers or vests to provide a foundation for ICW plates (In Conjunction With) so that they can fully realize their protective effect. These inserts use the same materials and have the same construction as the bulletproof PGD Delta vest, making them a fully functional protective equipment on their own, offering protection against projectiles, shrapnel, and stabbing weapons. The ballistic protection meets NIJ Type IIIA, up to .357 SIG/.44 MAG, and the stab protection meets NIJ Level 2, S1 up to 55 Joules.

The ballistic fabric is sealed in a water- and UV-proof cover, and the manufacturer offers a 7-year warranty (the NIJ standard requires 5 years).

Perfect in combination with the ultralight PE protective plate also offered by us.

Product details:

PGD Soft Armour Inlay NIJ Type IIIA
as a foundation for ICW plates

to ensure they also achieve their full effect when no separate protective vest is worn


NIJ Level IIIA (3A)

.357 SIG FMJFN, .44 Magnum SJHP, .357 Mag., 9mm Luger, 7.62 Tokarev


NIJ 0115.00 S1 55 Joule - stab protection

twice as stab-resistant as most other bulletproof vests


Ultra-thin – the ballistic insert measures only 4.9 mm.
Size 10x12" / 25x30cm

generally known as SAPI standard


Also cut and stab resistant (3 in 1)

Material science - Soft Ballistics / soft armor
The PGD protective vests offer different stab protection depending on the design, using the following materials, possibly in combination:

Aramid (Aromatic Polyamides) – e.g., Kevlar, Twaron, Gold Flex (brand names)
PE-UHMW (Ultra High Molecular Weight Polyethylene with high density) – e.g., Dyneema and Spectra (brand names)

Here is a list of the most important type classes, as well as the corresponding protective effect / caliber strength:

Type IIA - 9x19, .40 S&W, .45ACP – all FMJ
Type II - 9mm +P FMJ, .357 Magnum SJSP
Type IIIA - .357 SIG FMJFN, .44 Magnum SJHP
Type III - 7.62x51 NATO M80 ball FMJ
Type IV - .30-06 Spring. M2 AP

Protective effect / stab protection: NIJ Standard–0115.00  (external link)
 
Here, the stab energy is given in Joules that acts on the vest.

Level 1 - E1: 24J, E2: 36J
Level 2 - E1: 33J, E2: 50J
Level 3 - E1: 43J, E2: 65J

Test certificate

The Protection Group Danmark is, as the name suggests, based in Denmark and has been dedicated since 2013 to the production of safety equipment for security and police forces, military, or disaster relief. The manufacturer produces bulletproof and stab-resistant vests, ballistic helmets, protective vests, and hard armor plates, as well as other ballistic equipment. The highest quality and compliance with the corresponding protection classes are the top priority to best protect those who must put themselves in dangerous situations. These high standards are guaranteed through both internal quality assurance and international laboratories (Chesapeake, USA or Aitex, Spain). Anyone looking for high-quality protective equipment in Europe cannot overlook the Protection Group Denmark.

No government certification required.