B&T Print-X RBS FullSize, TITAN .223 Remington | M.A.R.S.

Currently available in caliber .30 with MARS in stock.

The B&T Print-X RBS FullSize TITAN suppressor is part of the large suppressor family from the renowned Swiss manufacturer and the latest development using state-of-the-art laser sintering manufacturing processes. The suppressors in the Print-X line are made from Inconel, a high-temperature resistant nickel-iron alloy, or Grade-5 titanium, allowing these suppressors to withstand fully automatic shooting - all suppressors in the Print-X RBS line are tested to military standards and can endure high volumes of fire without damage, making them the only 3D-printed suppressors that meet strict military requirements.

The Print-X designed for MSR (Modern Sporting Rifle) and law enforcement comes in 3 sizes: Full Size, Compact & Sub-Compact. The diameter is the same for all 3 models - 44mm - only the length varies. Accordingly, the more compact models have slightly lower suppression performance than the standard model.

These suppressors are offered by us as standard with RBS - Reduced Back Pressure. This technology creates less back pressure in the suppressor and is also known as "flow," "high flow," or "flow through." A suppressor with this technology operates on semi-automatic rifles without an adjustable gas block because the bolt speed is not, or only marginally, increased. However, such a suppressor is somewhat louder, or does not suppress the sound as effectively, since part of the gases is diverted forward for pressure reduction. The strain on the shooter is significantly lower, which is an important positive health factor, especially in enclosed ranges.

ALL models are delivered with glued adapters! The connection is to be considered non-removable. If you wish for a different configuration, please contact us before placing your order!

Available in 5 different mounting systems:

NATO

- QDN
- Rotex-X closure is the successor to Rotex-III & Rotex-V
- easier to use than its predecessors
- very widely used, works with all NATO muzzle brakes and flash hiders
- fits the classic A2 Birdcage Flashhider

M.A.R.S.

- QDM
- B&T's new proprietary system
- can be operated one-handed
- very light and compact

Currently, no further adapters in titanium are being manufactured!

The following versions are only available as individual parts, i.e., body and adapter separately:

Rotex IIA

- QDR
- B&T's proprietary system
- classic and proven

BoreLock

- QDAU
- from AseUtra
- known and proven
- widely used
- can be operated one-handed

Surefire

- QDSF
- widely used in the USA, rare here
- similar to Rotex-IIA, somewhat older but proven

Please note: All systems require a corresponding muzzle brake or flash suppressor. For the Print-X made of Inconel, the adapter is made of coated rust-resistant steel, while for the Print-X made of titanium, the adapter is also made of titanium. The BoreLock variant requires the tooth ring and therefore does NOT work on the muzzle attachments from Silent Steel or similar models without a tooth ring.

Product details:

B&T Print-X RBS FullSize

- up to caliber .223 Remington / 5.7mm FN or .308 Win. / .300 Blackout / 7.62x39 / etc.

- 3D printed using laser sintering
- monolithic, meaning the suppressor body is made from a single piece

- non-disassemblable

Material: Titanium

- high-temperature resistant Grade-5 titanium alloy
- sandblasted, matte titanium gray

Selection according to mounting system, see above
"Reduced Back Pressure"

- no back pressure in the system
- usable without adjustable gas block

Suppression performance: approx. 28dB(A)
Full Auto rated
Dimensions, without adapter: 168x44mm
Weight, depending on adapter:

- NATO: 445g (.223 Rem.
), 445g (.308 Win.)
M.A.R.S.: 315g (.223 Rem.), 315g (.308 Win.)

The Swiss company B&T AG (formerly Brügger & Thomet) has been in existence since 1991. Originally known for its suppressors, B&T also develops suitable mounts, handguards, and grips for various weapon systems due to governmental and military inquiries. The high quality and robustness of their products have found worldwide acceptance, leading to the development of their own weapon systems. The reliable semi-automatic rifles, which initially served for governmental use, are now also available for the civilian market.

Sale only to holders of a purchase permit.

Attention: This item is subject to export regulations and can only be purchased within Germany. NO international shipping!