HERA Linksystem CC compensator caliber 9 mm Luger (MCC9)

Available from stock with us. While supplies last - at this preferential price.

The Link System from Hera Arms offers a modular and simple way to mount and change muzzle attachments. The system consists of two parts – the base holder, which is screwed onto the muzzle thread of the weapon and remains on it, and the muzzle attachment, which is simply screwed into the base holder and aligned and fixed with 3 set screws in the style of a three-jaw chuck.

The muzzle attachments are available in various variants, but of course, all models can be easily mounted on the base holders – that is the principle of this system. When using a suppressor, it is important to choose the appropriate muzzle attachment – Hera Arms recommends using the muzzle attachments MBS (Muzzle Brake Short) or PB (Pepperbox) for optimal suppressor function. If the muzzle attachment is too long, the suppressor may not be able to be mounted.

When choosing the muzzle attachment, it is ESSENTIAL to select the correct caliber!
A muzzle attachment .30 can be used with a weapon .223 but NOT vice versa!
A suppressor/weapon combo in .223 can be used with a muzzle attachment .30 but NOT vice versa!

The new HERA Link system at a glance - examples:

Mounting the Link System:

The base holder is screwed directly onto the corresponding muzzle thread.

Please do not use crush washers or spacers!
Applying thread locker is not necessary.

The base holder is screwed tightly against the barrel – proper clamping of the weapon is essential.
Before the muzzle attachment is mounted, ensure that the 3 set screws in the base holder are turned out far enough so that they do not block the muzzle attachment!
The chosen muzzle attachment is first screwed into the base holder as far as possible and then aligned – it is unscrewed just enough until the compensator holes are in the desired position.
The two parts are fixed against each other by tightening the 3 set screws in the base holder.

The screws should first be lightly tightened one after the other and finally hand-tightened.
When using the base holder SD, care must be taken that the set screws do not block the M27x1.5mm thread – this should, however, be impossible in the fixed state.
If the set screws protrude beyond the body of the base holder in the fixed state, the muzzle attachment has not been properly mounted or there are foreign objects in the construction.

If the muzzle attachment is to be changed or the system cleaned, the 3 set screws must first be loosened so that the muzzle attachment can be removed.
In general, we recommend having the assembly performed by a knowledgeable person.

HERAARMS is a relatively young German firearms manufacturer that has already made a name for itself in the European and US markets thanks to innovative product ideas. Due to extremely high manufacturing density, almost the entire production of the products takes place entirely in Germany - this allows HERA Arms to offer high quality and a very good price/performance ratio. Especially sports shooters get their money's worth at HERA; in addition to common calibers, there are also 9 mm rifles with various barrel lengths, front stock repeaters – everything a shooter's heart desires. Thanks to massive investment, HERA ARMS will be expanding even more in the future – we look forward to new products.