B&T Print-X RBS, Inconel without adapter Compact, .223 Remington

Available from stock with us. Please pay attention to the respective delivery time indications.

The B&T Print-X RBS suppressor is part of the large suppressor family of the renowned Swiss manufacturer and the latest development using state-of-the-art laser sintering manufacturing processes. The suppressors of the Print-X line are made from Inconel, a high-temperature resistant nickel-iron alloy, or titanium, allowing these suppressors to withstand fully automatic shooting - all suppressors in the Print-X RBS line are tested to military standards and can endure high volumes of fire without damage, currently being the only 3D-printed suppressors that meet strict military requirements.

The Print-X designed for MSR (Modern Sporting Rifle) and authorities comes in 3 sizes: Full Size, Compact & Sub-Compact. The diameter is the same for all 3 models - 44mm - only the length varies. Accordingly, the more compact models have slightly lower suppression performance than the standard model.

These suppressors are offered by us as standard in RBS - Reduced Back Pressure. This technology creates less back pressure in the suppressor and is also known as "flow", "high flow" or "flow through". A suppressor with this technology works with semi-automatic rifles without an adjustable gas block because the bolt speed is not, or only marginally, increased. However, such a suppressor is somewhat louder, or does not suppress the noise as effectively, since part of the gases is diverted forward for pressure reduction. The strain on the shooter is significantly lower, which is a considerable positive health factor, especially in enclosed ranges.

This version of the Print-X consists only of the suppressor body and the HUB interface with 1.375"-24 thread for the corresponding adapters. This offers the shooter a wide variety of models so that the suppressor can be attached to the muzzle device of their choice. The adapters MUST ALWAYS be glued! If the adapter is not glued, it will loosen during shooting. The bonding in the suppressor / blast deflector is done with Rocksett - NOT with regular thread lockers! If the suppressor is purchased together with a suitable adapter from us, we can perform the installation free of charge upon request.

You can find the suitable adapters here.

Available in 5 different mounting systems, the adapters are NOT included in the delivery:

- Rotex IIA
- QDR
- B&T's own system
- classic and proven

- NATO
- QDN
- Rotex-X closure is the successor to Rotex-III & Rotex-V
- easier to use than its predecessors
- very widely used, works with all NATO muzzle brakes and flash suppressors
- fits the classic A2 Birdcage Flashhider

- M.A.R.S.
- QDM
- B&T's new own system
- can be operated one-handed
- very light and compact

- BoreLock
- QDAU
- from AseUtra
- known and proven
- widely used
- can be operated one-handed

- Surefire
- QDSF
- widely used in the USA, rare here
- similar to Rotex-IIA, somewhat older but proven

Please note: All systems require a corresponding muzzle brake or flash suppressor. For the Print-X made of Inconel, the adapter is made of coated rust-resistant steel, while for the Print-X made of titanium, the adapter is also made of titanium. The BoreLock variant requires the tooth ring and therefore does NOT work on the muzzle devices of Silent Steel or similar models without a tooth ring.

Product details:

- B&T Print-X RBS
- up to caliber .223 Remington / 5.7mm FN or .308 Win. / .300 BLK / 7.62x39, etc.

- 3D printed using laser sintering
- monolithic, i.e., the suppressor body consists of one part
- not disassemblable

- Material: Inconel
- high-temperature resistant nickel-iron alloy
- sandg
estrahlt, matt silber


Auswahl nach Kaliber und Länge, siehe oben
"Reduced Back Pressure"

kein Rückstau im System
verwendbar ohne verstellbare Gasabnahme


Dämpfungsleistung:

Fullsize ca. 28dB(A)
Compact ca. 24dB(A)
Sub-Compact ca. 20dB(A)


Farbe: sandgestrahlt matt, blank
Full Auto rated
Maße, ohne Adapter

Fullsize: 168x44mm
Compact: 128x44mm
Sub-Compact: 105x44mm


Gewicht, je nach Kaliber

Fullsize: 415-420g
Compact: 340-345g
Sub-Compact: 280-285g

Die Schweizer Firma B&T AG (ehemals Brügger & Thomet) besteht seit 1991. Ursprünglich für Ihre Schalldämpfer bekannt, entwickelt B&T aufgrund behördlicher und militärischer Nachfragen auch passende Montagen, Handschütze, Griffe für verschiedenste Waffensysteme. Die hohe Qualität und Robustheit ihrer Produkte fanden weltweit Zuspruch, sodass es letztendlich zur Entwicklung eigener Waffensysteme kam. Die zuverlässigen Selbstladegewehre, die zuerst für Behördliche Verwendung Ihren Dienst antraten, sind nun auch für den zivilen Markt erhältlich.

Abgabe nur an Inhaber einer Erwerbsberechtigung.

Achtung: Dieser Artikel unterliegt Ausfuhrbestimmungen und kann ausschließlich innerhalb Deutschlands erworben werden. KEIN Auslandsversand!