EOTECH XPS3-0

Available from stock with us.

The XPS 3-0 from EOTECH is among the best quality holographic sights currently available. In terms of workmanship, quality, and performance, this high-end reflex sight is truly worth its price. The nearly indestructible housing is additionally protected by a protective hood made of hard-anodized, matte black aluminum. With the integrated quick-release mount, you can quickly and, above all, accurately attach the sight to your weapon. The battery compartment is accessible from the side, and the controls are located on the back, facing the shooter. The compact design of the system also takes up very little space on your Picatinny rail, ~67 mm is more than sufficient here.

But it's not just the workmanship that is top-notch at EOTECH - the holographic reticle, consisting of hundreds of small dots, ensures high sharpness and low glare. The 1 MOA center dot is intended for fine target acquisition (2.9 cm at 100m), while the 68 MOA surrounding circle is primarily for quick target acquisition during hunting or dynamic disciplines (30 cm at 50m). The brightness can be adjusted in a total of 20 levels, ensuring perfect visibility in any daylight situation.

Differences to the EXPS model: Brightness control at the back of the device (on EXPS, it's on the side, making it easier to operate in a shooting position), On EXPS: Quick-mount system - XPS with Torx screw for fixation. The height of the optical axis is approximately 38mm for the 55x and XPS models, and about 45mm for the EXPS models.

In short - simply brilliant and definitely worth the money!

What are the differences between the variants?

XPS - the base

- no quick release
- controls are located at the back (towards the shooter)
- height of the optical axis approx. 38mm

EXPS - the tactical

- quick release
- controls are located on the side (left)
- height of the optical axis approx. 45mm

2 - the civilian

- no night vision mode

3 - the operator

- night vision mode

What are the different reticles?

-0

- the standard reticle
- 1 MOA dot with 65 MOA circle

-1

- 1 MOA dot, ONLY the dot

-2

- 1 MOA dot with 65 MOA circle
- another 1 MOA dot below the first, for 500yds (at 50/200yds zero)

-4

- 1 MOA dot with 65 MOA circle
- three additional 1 MOA dots below the first, for 400, 500 & 600yds (at 50/200yds zero)

This results in, for example:

XPS2-0

- without quick mount
- rear controls
- without night vision mode
- circle-dot reticle

EXPS3-4

- quick mount
- side controls
- with night vision mode
- circle-dot reticle with 3 additional hold points

The night vision mode adjusts the illuminated reticle down so that there is no glare from night vision devices (NVG-compatible).

Reticle:

Highlights:

- 1x magnification
- Parallax-free
- Illuminated reticle: 1 MOA red dot + 68 MOA ring
- Unique illuminated ring structure made of many small dots, resulting in low dispersion
- 20 brightness levels for very fine adjustment in daylight
- Programmable shutdown (automatic)
- Not compatible with night vision devices
- including Picatinny / Weaver mount
- Waterproof up to 3m diving depth
- Fog-free due to hermetic sealing of the housing
- Protective hood made of hard-anodized, matte black aluminum
- Shock-resistant housing made from a block of aircraft aluminum
- Low battery warning

Scope of delivery:

- EOTech XPS3-0™
- Quick start guide
- no battery!

The manual in German can be found here.

Note on products from EOTECH:

The packaging of the products is opened upon arrival in Germany to verify the serial numbers with the manufacturer's specifications, meaning any "seal stickers" may no longer be intact.
r intact. The battery is already factory-installed. Due to these work steps, it may be possible that assembly traces are visible. This is completely normal. This is NOT B-grade merchandise!

Technical Data:

Magnification:
1x


Eye Relief in mm:
unlimited


reticle:
1 MOA + 68 MOA ring


Illuminated Reticle:
yes (red)


Brightness Levels:
20x 


reticle adjustment / click:
0.5 MOA (100 m) 


Max. Reticle Adjustment Height:
+- 40 MOA


Max. Reticle Adjustment Side:
+- 40 MOA


Temperature Range:
- 40°C to + 60°C


Size in mm:
95 x 61 x 61 mm (l x w x h)


Weight in g:
250 g 


Battery:
yes, CR123

EOTECH produces professional optics that are trusted by leading professionals worldwide. Unmatched speed, accuracy, and reliability are cornerstones of this legendary brand. Since 1996, EOTECH Holographic Weapon Sights (HWS) have been designed, developed, and manufactured in the USA. In 2016, EOTECH expanded its optics series with the introduction of the Vudu line of premium magnifying optics designed for the most demanding users. The rigorous standards require a continuous focus on product quality, not quantity, to ensure that the highest specifications are not only met but exceeded. When there is no room for error, compromises are not an option. Exactly the right league, where EOTECH feels at home.

Attention: This product contains very small and/or button batteries. 

Improper handling of batteries can lead to significant injuries or even death within just 2 hours, especially in young children (e.g., chemical burns and possible perforation of the trachea). If you suspect a battery has been swallowed, please seek medical attention immediately. Keep batteries out of reach of children and dispose of empty or defective batteries promptly in accordance with local disposal regulations. 
General usage note: Always insert batteries correctly (+/-), risk of injury from fire, explosions, or leaks, do not disassemble, charge, crush, expose to fire or high temperatures.

Note: Battery and Electrical Law (§ 18 BattG in conjunction with § 10 para. 1 ElektroG)