ASE UTRA Silencer Cleaner 500 ml bottle (€4.50*/100 ml)

Available from stock with us.

For your silencer, only the best - the Ase Utra silencer cleaner removes even stubborn contaminants and deposits - all without exhausting "post-processing." This is made possible by the specially developed cleaning fluid, consisting of self-active, pH-neutral, and water-soluble substances.

The cleaning time is approximately 20 to 120 minutes, depending on the degree of soiling; the application is also possible in an ultrasonic bath (usually not necessary). Ase Utra recommends the cleaner for the S product lines, especially the DUAL-B models.

WARNING: not compatible with the Jet-Z or Radien series.

Content: 500 ml

The cleaning agent is suitable for:

- all materials and coatings, including Cerakote™,
- both disassemblable and one-piece silencers, and
- stubborn contaminants.

Application of the Ase Utra silencer cleaner

For one-piece silencers: Seal one side with a rubber stopper and fill in the cleaner. For disassemblable multi-part silencers, place the individual parts in the cleaner.

Rinse with warm water after about 20 to 30 minutes. For heavy soiling, the exposure time can be extended to up to 120 minutes. Preheating the cleaning agent to 50 °C can also enhance the cleaning effect.

The Finnish silencer manufacturer ASE UTRA is one of the largest manufacturers in the world, with a production volume of over 10,000 pieces annually, and is known worldwide far beyond its national borders. Military, police, and hunters especially appreciate the high quality and outstanding performance of the silencers. ASE UTRA exclusively uses materials of the highest quality and manufactures its silencers from several firmly welded parts, ensuring maximum durability and highest load capacity. ASE UTRA offers all conceivable silencers for calibers from .22 lfb to 0.50 BMG. If you are looking for the best quality, you are exactly right with ASE UTRA.

Supplementary information according to EU Product Safety Regulation (GPSR):

Responsible person: SchleTek Deutschland, Boschstraße 4, 47574 Goch, Germany, www.schletek.de

Safety information:

Contains: Sodium mercaptoacetate, D-Limonene, C10-iso-Alcohol, 7 E0.

Health hazard statements:
H290 May be corrosive to metals. H302 Harmful if swallowed. H317 May cause allergic skin reactions. H319 Causes serious eye irritation. H412 Harmful to aquatic organisms, with long-lasting effects.

Safety
General: P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P103 Read label before use.
Prevention: P261 Avoid breathing dust / smoke / gas / mist / vapor / aerosol. P273 Avoid release to the environment. P280 Wear protective gloves / protective clothing / eye protection / face protection.
Response: P333 + P313 If skin irritation or rash occurs: Get medical advice / attention. P337 + P313 If eye irritation persists: Get medical advice / attention. P362 + P364 Take off contaminated clothing and wash it before reuse. P390 Collect spillage to prevent material damage.
Disposal: P501 Dispose of contents / container in accordance with local / national / international regulations.