K+M Precision Shooting Products Fine Adjustable Case Neck Turner

K+M Feinjustierbarer Hülsenhalsabdreher Set

Manufacturer: K+M Precision Shooting Products, USA
Distribution in Germany: Fa. Heinz Henke, 49757 Werlte
Optional accessories: Lee Hülsenhalter, Führungsdorne, Bügelmessschraube
Item is new (still original sealed)
Video on YouTube: K+M Shooting, How to use Neck Turner Setup
current retail price: € 194,-- special sale price: € 149,--

Other: Over time, the following has crystallized:
To turn case necks in a precision-enhancing manner, meaning evenly, there are only two methods: a super-precise lathe or a hand-held neck turner. The latter are far preferred.

The delivery includes the completely depicted device, but without Lee Hülsenhalter and Führungsdorn. The cases are clamped in the holder located above the handle and then either turned by hand or, after removing the handle, with a cordless screwdriver. The guiding mandrel is gently inserted into the case mouth, and the cutting edge removes material from the outside of the case neck. The cutting depth can be adjusted via the side screw (see enlarged excerpt with the designation top view). The adjustment is very precise, as 440 revolutions correspond to a distance of 25.4 mm. With a turn of the screw from one point to the next, the cutter moves a distance of 5/1000 millimeter. This makes the adjustment very easy.
Product safety information: This product was made available on the marketplace before 13.12.2024. For manufacturer and safety information, please contact the offering dealer.