DJV Splitter Target Shooting

Quick detection of hits from a distance even without the use of optics The DJV-Splitterscheibe Anschuss (analogous to the DJV-Anschussscheibe for telescopic sights) allows for quick detection of the impact point when shooting a rifle at 100 meters. A well-visible yellow ring forms around the bullet hole. This makes the hit easily recognizable from a distance even without the use of optics. Zeroing on a spot: The black aiming point in the center of the main target with cm grid represents a two-centimeter scatter circle with the white ring, which is also the aiming point for 'spot' at 100 meters. Zeroing on GEE: Four centimeters above the 100-meter aiming point is a red square with a two-centimeter edge length and a white dot in the center (GEE). The square is the measure for shooters who want to zero their weapon four centimeters high at 100 meters. The shot group should then be within the red square. To the right and left above the main target are two reactive control areas with a grid (4 x 4 cm), which can be used to confirm precision after zeroing on the main target. Below the main target are three (reactive) circular areas with 1 MOA, 1/2 MOA, and 1/4 MOA (minute of angle) for advanced precision testing of the rifle. The complete target in the format 21.0 x 29.7 cm is self-adhesive and can be stuck onto cardboard, wood, or other dry surfaces. Format: 21.0 x 29.7 cm (DIN A4) Color: black, white, yellow Self-adhesive Self-marking, high contrast, well visible Sold individually or as a set with 25 targets each.