Ballistol Silencer Cleaner

Self-cleaning • Odor-neutral • Material-friendly The surfactant-containing, acid-free, and odor-neutral silencer cleaner automatically dissolves and neutralizes combustion residues without the use of additional tools. Contains rust protection additives. Automatically dissolves and neutralizes combustion residues Protects against rust through high-quality additive Surfactant-containing Material-friendly Acid-free and odor-neutral Color change as a dissolution indicator Use of additional tools not necessary Optional rubber cork available for sealing the silencer Content: 500ml Application: Seal one side of the silencer and fill completely. Leave the cleaner in the silencer for at least 2 hours. All combustion residues will be dissolved automatically. For silencers with particularly high shot loads, warm the cleaner to about 40 °C and extend the exposure time to at least 4 hours. Then remove the cleaner. To dissolve remaining dirt, fill the silencer halfway with clear water. Seal the second opening and shake vigorously. Repeat this rinsing process if necessary until the water no longer contains soot particles. If the silencer cannot be sealed (due to design), it can be completely submerged in the cleaner. Also suitable for disassemblable silencers. Submerge soiled parts and clean with a brush and water after the exposure time. Note: Check surfaces (coatings and paints) for compatibility before use. Hazard and safety information: Warning: Causes serious eye damage. If medical advice is needed, have packaging or label at hand. Keep out of reach of children. Read label before use. Wear protective gloves / protective clothing / eye protection / face protection. In case of contact with eyes: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing. Immediately call a poison center or doctor. Manufacturer: Ballistol GmbH Ballistolweg 18 4168 Aham Germany [email protected]