Sinclair TiN Turning Mandrel/Neck Turning 6.5 mm (0.262")

Sinclair TiN Turning Mandrel / Neck Turning 6.5 mm (0.262") – Turning Mandrel / Neck Turning
The Sinclair Turning Mandrel in 6.5 mm / 0.262" is designed for precise Neck Turning: The case is aligned cleanly during turning, which promotes more uniform neck wall thicknesses. Additionally, the mandrel can also be used to adjust the Neck Tension. The surface is TiN-coated (Titanium Nitride). According to the manufacturer, this coating increases glide capability, reduces wear, and can significantly extend the lifespan compared to standard steel mandrels (up to 10 times mentioned).Highlights:Diameter: 0.262" (≈ 6.65 mm)TiN coating for higher wear resistance and better lubricityManufacturing: approx. 0.002" under bullet diameter (typical for defined Neck Tension)For case neck turning (alignment) and also for adjusting the Neck TensionTechnical Data:ManufacturerSinclair InternationalArticle Number749019016Caliber6.5mmDiameter0.262" (≈ 6.65 mm)CoatingTiN (Titanium Nitride)Note on Size SelectionMandrel ≈ 0.002" under bullet Ø (e.g. 0.264" Bullet → 0.262" Mandrel)