Anschütz ceramic coating

Keramik-Hochleistungsbeschichtung Anschütz GunCoating is a ceramic high-performance coating for all types of firearms and knives. Despite its extreme lubricating properties, Anschütz GunCoating is residue-free, forming an invisible, dry film on the weapon and enhancing the sliding properties of moving parts on the weapon. Harsh metallic noises from rubbing parts – such as those from the bolts of repeaters – are significantly reduced. Anschütz GunCoating forms a strong bond with the surface, does not run off, and thus protects the weapon long-term from corrosion. Anschütz GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver embellishments, hardening, cast, and rubber. Anschütz GunCoating compensates for microscopic cracks and scratches and permanently smooths the treated surfaces. Wear is minimized, and the shooting performance of the weapon is increased. Anschütz GunCoating works from the first application – even on older weapons!

Properties
- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and fresh water resistant, economical in use
- High temperature resistance from -40 °C to +750 °C
- Does not harden, does not stick, is colorless and odorless
- Cleaning of the weapon is facilitated

Instructions for use
Anschütz GunCoating is fundamentally applied to the cleaned weapon. Metal parts should be degreased before application so that the ceramic particles can adhere directly to the metal. Anschütz GunCoating is sprayed thinly onto the surfaces and then spread with a lint-free cloth, creating a thin, wet film on the surface. Anschütz GunCoating then dries automatically. The coating is dry at room temperature after about 30 minutes and completely hardened after about 2 hours. When applying in the barrel, it is important to ensure that the barrel is thoroughly cleaned beforehand. Anschütz GunCoating is then applied thinly with cotton or a felt plug. For large-area care, the aerosol spray is recommended. For coating small parts and adjusting triggers, the liquid product in the dropper bottle should be used.

Basic price:
Anschütz Ceramic Coating Aerosol Can (Article Number: 563): 100ml: € 14.50 / 1Liter: € 145
Anschütz Ceramic Coating Aerosol Can (Article Number: 565): 300ml: € 23.50 / 100ml: € 7.83 / 1Liter: € 78.30
Anschütz Ceramic Coating Liquid (Article Number: 564): 100ml: € 14.50 / 1Liter: € 145

Warning! Extremely flammable aerosol. Container is under pressure (spray can). May burst if heated. Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F. Do not pierce or burn, even after use. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Formation of explosive/flammable vapor-air mixtures possible during use.