BUNDLE | 100J+ FULL-TUNING-SET | SHORT VERSION | Milsig Valken M17 CQC A2 | CQMF G3 | EXTREME PERFORMANCE | STEEL or ALU to choose

Installation and Shooting Video:
   
1x STEEL TUNING BARREL - SHORT VERSION
WARNING / SELECTION between CQC A2 and CQMF G3 (STEEL and ALU)

suitable for the Milsig / Valken M17
Material: Steel blued or ALU anodized, depending on selection
Dimensions: 190mm long, thread (22x1.5)
Diameter: .683 / approx. 17.35mm
very high performance increase, depending on modification up to 100Joule+


+
Unleash the full potential of your marker with our revolutionary HEAT CORE Chamber. Up to 1000% performance increase possible!!
WARNING: For bottle pressures over 800 PSI, our springs (Tuning Bolt Spring, Sear Spring and/or Bolt Locking Spring) are recommended. This is necessary to prevent unintended firing in the worst case.
ASA Tuning HEAT CORE Chamber


Upgrade valve housing for the Milsig Valken M17
enlarged air chamber for increased volume/shots
Integrated manometer, makes it easier to read the current pressure
CNC machined, original dimensions
Material: Aluminum, black anodized

Delivery includes:

1x Chamber
4x M6 screws
1x O-Ring

+
1x Tuning Bolt Spring  

suitable for the Milsig M17
Material: Steel
Quality: very robust, no bending or warping
up to 200% performance increase, depending on the setup of your marker


+
2x BOLT LOCKING SPRING  

suitable for the Valken Milsig M17
Material: Steel
Color: silver
up to 200% performance increase, depending on the setup of your marker


+
2x SEAR SPRING

suitable for the Valken Milsig M17
Material: Steel
Color: black

+
3x HEAT CORE BOLT BUMPER 

suitable for the Milsig Valken M17
Material: 2-component industrial silicone
Thickness: 3mm

Shore hardness: A26

Tear elongation limit: 500%
Temperature resistance up to 250° Celsius
Maximum pressure: 2000 PSI HPA bottle output pressure (tested)

+
6x UPGRADE CUSTOM BALL DETENTS

suitable for the Valken Milsig M17
Material: 2K silicone
perfect fit
easy replacement

+
4x O-Ring HEAT CORE
+
MUZZLE BRAKE | 22x1.5mm 

suitable for the FSC Pistol, Valken/Milsig M17 and HDX68
Material: Alu, powder-coated and black anodized
Precise fit, machined from solid
Thread: 22 x 1.5 mm
Diameter: approx. 2.5 cm
Length: 7 cm