Powerkit.50 V2 for HDR50 + GEN.2 | 7.5j Version Export Valve | Maximum Power | 20-30J | Complete Set

Installation Video:

The Powerkit.50 V2 promises an additional performance increase by introducing a hexagonal (drilling 2.5 mm) in the Valve Pin, allowing the Co² to expand further due to the hexagonal shape. Furthermore, we have enlarged the hole in the valve to 1 mm and equipped it with an O-ring to compensate for tolerances in the pressure housing for fit accuracy. This Powerkit fits all HDR50 markers.
Details | Improvement:

suitable for the HDR50 as well as GEN.2 version
no valve needed in the pressure chamber anymore

Removal of the valve (throttle in the pressure chamber) afterwards:


Valve: press the insert into the pressure chamber with the included screw
PIN: screw in with the included Allen key

Material: stainless steel, for better sliding and protection of the sealing ring

Increases performance to over 25 Joule+ *

longer valve opening time, larger gas volume
reduced cool down effect

*temperature dependent
Installation can be reversed at any time.
Recommendation:
Since Co2 is very temperature dependent, we recommend storing the Co2 capsules at room temperature, as this allows the Co2 to expand and the pressure to increase!
Scope of delivery depending on selection:

1x Valve (pressure chamber insert) + 1x screw
1x valve pin + 1x Allen key 2.5 mm

Attention strong performance increase! Not suitable for paintball. Only suitable for the 7.5 Joule (F-version) !!!
The purchase and possession of this export valve is free, but the installation is prohibited in Germany due to the performance increase and leads to the loss of warranty claims.
On behalf of UMAREX GmbH & Co KG, we are obliged to inform you as a customer of this warning notice! Homedefence-24 and UMAREX GmbH & Co. KG accept no liability!