Powerkit.50 V2 for HDP50 | Export valve | (GEN.2) 7.5j | 25j+ | Complete set

The Powerkit.50 V2 promises an additional performance increase through the incorporation of a hexagonal (bore 2.5 mm) in the valve pin, allowing the CO² to expand further due to the hexagonal shape.
Furthermore, we have expanded the bore in the valve to 1 mm and equipped it with an O-ring to compensate for tolerances in the pressure housing for accuracy. This Powerkit fits all HDP50 markers.

Details | Improvement:

suitable for the HDP50 as well as GEN.2 version (only at 7.5J)

no valve needed in the pressure chamber

Removal of the valve (throttle in the pressure chamber) afterwards:

Valve: press the insert into the pressure chamber with the included screw
PIN: screw in with the included Allen key

Material: stainless steel, for better sliding and protection of the sealing ring

Increases performance to over 25 Joules+ *

longer valve opening time, larger gas volume
reduced cool down effect

*temperature dependent
Installation can be reversed at any time.
Recommendation:
Since CO2 is very temperature dependent, we recommend storing the CO2 capsules at room temperature, as this allows the CO2 to expand and the pressure to rise!
Scope of delivery:

1x Valve 7.5J + 1x valve pin + 1x Allen key 2.5 mm + 1x screw

Attention strong performance increase! Not suitable for paintball. Only suitable for the 7.5 Joule (F-version) !!!
The purchase and possession of this export valve is free, but the installation is prohibited in Germany due to the performance increase and leads to the loss of warranty claims.
On behalf of UMAREX GmbH & Co KG, we are obliged to inform you as a customer of this warning notice! Homedefence-24 and UMAREX GmbH & Co. KG accept no liability!