Powerkit.50 V2 for HDR50 | 11J Version Export Valve | Maximum Power | 20-30J | Complete Set

The Powerkit.50 V2 promises an additional performance increase through the incorporation of a hexagonal (bore 2.5 mm) in the valve pin, allowing the CO² to expand further due to the hexagonal shape. Furthermore, we have enlarged the bore in the valve to 1 mm.
Details | Improvement:

suitable for the HDR50 (suitable for 11J)
no valve needed in the pressure chamber

Removal of the valve (throttle in the pressure chamber) afterwards:


Valve: insert into the pressure chamber
PIN: screw in with the included Allen key

Material: stainless steel, for better sliding and protection of the O-ring

Increases the power to over 25 Joules+ *

longer valve opening time, larger gas volume
reduced cool down effect

*temperature dependent
Installation can be reversed at any time.
Recommendation:
Since CO2 is very temperature dependent, we recommend storing the CO2 capsules at room temperature, as this allows the CO2 to expand and the pressure to increase!
Scope of delivery:

1x Valve (pressure chamber insert)
1x valve pin + 1x Allen key 2.5 mm

Attention strong performance increase! Not suitable for paintball.
The purchase and possession of this export valve is free, but the installation is prohibited in Germany due to the performance increase and leads to the loss of warranty claims.
On behalf of UMAREX GmbH & Co KG, we are obliged to inform you as a customer of this warning notice! Homedefence-24 and UMAREX GmbH & Co. KG assume no liability!