EGW sight mount HK USP - Vortex / FastFire / Docter

EGW EGW SIGHT MOUNT HK USP - Vortex / FastFire / Docter

Compact and reliable mount for your Vortex Viper/Venom or similar.
The EGW Red Dot Sight Mount is specifically designed for the H&K USP and allows for easy installation. Here are the details:
Product Description
The EGW Red Dot Sights are designed to be installed from left to right (with the muzzle facing forward). The dovetail has a progressive taper that makes installation easier. Simply remove the rear sight of your firearm and replace it with the EGW mount to attach your Vortex Viper/Venom, Burris FastFire, or Docter Red-Dot Sight. You can remove the mount at any time and reattach your rear sight.
Installation Instructions:

Remove the rear sight*
Install the EGW Sight Mount in the dovetail
Tighten the set screw (if applicable)
Place the Red Dot Sight on the EGW Sight Mount (a small piece of paper between the Red Dot Sight and the Sight Mount makes removal easier and keeps Loctite away from the Red Dot Sight.)
Apply blue Loctite to the included mounting screws
Tighten the mounting screws to 15 in/lbs

Included Accessories:

2 Button Head Cap Screws - for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - for Burris FastFire and Docter Sights

The screws provided with this mount require a 5/64'' Allen wrench for installation.
Note: Modifications to your firearm may void the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is accepted for damages or injuries that may result from improper installation or use of this product. This mount does not work with USP Compact, USP Expert, USP Elite, VP9, VP40, P30, P30L, P30SK, HK45, or HK45C.

Are you looking for additional items that we do not yet have in stock? Send us a message and we will take care of sourcing them.