Hornady Match Grade Die Set .300 Norma Mag. with micrometer bullet seating screw

Hornady Match Grade Die Set .300 Norma Mag. with Micrometer Bullet Seating Die
2-piece die set consisting of a very precise full-length sizing die for sizing bushings, which are available in diameter increments of .001", and a seating die. The sizing die comes with a matching expander and a retaining sleeve for the ejector pin, in case you do not want to use the expander. Sizing bushings from RCBS, Redding, or Wilson also fit. The sizing bushings must be ordered separately. These dies fit all presses with the standard thread 7/8-14 ".Rough determination of the suitable sizing bushing: Measure the neck diameter of a finished cartridge and subtract 0.002"-0.003" from that measurement. Use this measurement to find the suitable sizing bushing. Hornady Match Grade die sets include the following accessories:Full-length sizing dieIn-Line Bullet Seating Die with MicrometerElliptical ExpanderLock Nut for the Primer Ejector PinStandard Seating StemCustom ELD Match Bullet Seating Stem