Sako S20 Hunter RTG Short

.308Win
LL 51cm
Shotgun trigger
Muzzle thread 5/8x24
Hole stock Tungsten Cerakote
Green plastic hole stock with buttstock adjustment
Tungsten Cerakote coating
Overall length 104 cm

Mounting integrated Weaver bases
Other: The core of the stock consists of an aluminum chassis. The system sits snugly in a V bedding, and all other parts of the stock are attached to this chassis. Such constructions are typically known from stocks for precision rifles. This design makes the Sako S20 not only modular but also well-equipped for consistently high precision.
The Sako S20 uses a steel system that has a Picatinny profile milled into the upper part. This allows for a very cost-effective mounting of a riflescope. With a set of decent Picatinny rings, such as those from Recknagel or Leupold, any common scope can be mounted.

Since the Picatinny rail is directly milled into the system, it provides the highest possible strength.

The principle of ergonomics continues with the trigger. First, the wide trigger blade stands out, which provides good control. The shooter can also adjust the trigger position to their needs.

The trigger blade can be shifted back by up to 3 mm and forward by up to 4 mm.

The trigger weight is, of course, adjustable as well. Here, an adjustment between 1,000-2,000 g can be made.
Product safety information: Manufacturer: Sako Ltd, P.O. Box 149, FI-11101 Riihimäki, Finland, Tel. (+358) 10 830 5200
Responsible: Manfred Alberts GmbH, Bielsteiner Str. 66, D-51674 Wiehl-Bielstein, Phone +49 2262 7221-0
WARNING: A valid acquisition permit is required for the purchase of this product!!!