Silicone grease 5 g

Silikon grease for Bolyguard and Pro-Optics trail cameras. Use this silicone grease to ensure an absolutely waterproof connection of the external storage cable to the camera. It also prevents rubber parts from drying out. Instructions for Bolyguard cameras: Remove the cover on top of the camera. This is done by unscrewing the small Phillips screw that holds the cover. Apply plenty of silicone grease around the edge of the opening as well as on all rubber parts. Then connect the external storage cable, ensuring it is fully inserted. Instructions for Pro-Optics cameras: Apply silicone grease to the front of the connection cable and then connect it to the camera. WARNING:

Causes skin irritation
Causes serious eye irritation
May cause allergic skin reactions
Avoid breathing dust/fume/gas/mist/vapors/aerosol
Wear appropriate protective clothing, gloves, and eye/face protection
Contaminated work clothing must not leave the workplace
Wash hands thoroughly after handling
Use only outdoors or in well-ventilated areas

In case of eye contact: Rinse eyes gently with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
In case of skin contact: Wash with plenty of water and soap.
If eye irritation persists, get medical advice.