Hatsan Spring - Licensed Striker S/X, Airtac

Hatsan original springs +10 Joules, suitable for model Striker. The latest springs from Hatsan are of high quality and have a long lifespan. The length of the springs may need to be adjusted. We recommend shortening the springs by about 3 turns rather than removing any piston weight (this is especially true for the spring in model 125/155). One may get the impression that the guns are easier to shoot when a few additional rounds are shortened. Authorized gunsmiths can provide more information on this. With the appropriate length, the springs also fit other guns. is reduced. Features Note! Springs and internal modifications may only be carried out by an authorized person. Accessories Springs Springs lose power over time, and after several thousand shots fired, it may be sensible to replace the spring. This can be easily done by an authorized gunsmith. Many air rifles are designed for a significantly higher muzzle velocity than is license-free in Sweden. A license for sports shooting or hunting can be applied for at the police. Your local gun dealer can tell you more about this. All internal modifications may only be carried out by an authorized person. If internal modifications are made at your own risk, the warranty of the gun is void. Springs max. 10 Joules replacement springs that replace old, tired springs. License-free, i.e., maximum 10 Joules impact energy. Note! Springs and internal modifications may only be carried out by an authorized person. Titanium springs high-performance replacement springs that replace old, tired springs. ATTENTION! Springs and internal modifications may only be carried out by an authorized person. Specifications: Weight: 130 g Other: License spring output velocity pellet: 230-300 m/s Wire diameter: 3.1 mm Number of turns: 42 pcs Inner diameter: 12.3 mm Outer diameter: 19.3 mm