Stalon Silencer Grease

The noise filter grease protects and lubricates the threads on the weapon and the silencer. The grease has been developed to withstand all types of weather conditions, heat, wear, and pressure. The grease should be applied to all Stalon silencers. 25 grams Protects the threads on the weapon and silencer Can withstand high temperatures and high pressure Red grease does not contaminate parts Suitable for all types of threads Dimensions: Tube: Length 110 mm, Width 40 mm Weight: 29 grams Material #277 Moly Red Grease About Stalon Noise Filter Grease The noise filter grease protects and lubricates the threads of the barrel and the silencer. The grease has been tested under extreme conditions for heat and pressure to provide protection for the threads of the weapon and the silencer for as long as possible. The grease is supplied in a tube containing 25 g of grease. The noise filter grease protects and lubricates the threads on the weapon and silencer; the grease protects the barrel from rust and dirt. The grease is also suitable for the W-series joint, meaning the threads that hold the front and rear together; by lubricating this part, the risk of the front and rear sticking is minimized. ASSEMBLY INSTRUCTIONS The noise filter grease is applied to the threads of the weapon and, if necessary, to the connection point/the joint of the silencer (W-series). Before applying the grease, the threads should be cleaned of grease and dirt. Once the threads are clean, the noise filter grease can be applied with a brush, a small brush, a finger, or similar. Apply the grease generously and wipe off any excess grease when you are finished. After the threads have been thoroughly lubricated with noise filter grease, the silencer and/or another product should be assembled. Check the threads after assembly to ensure that no additional grease has been squeezed out.