Fluna Tec Gun Coating Spray 100ml

Fluna Tec Gun Coating Spray 100ml
FLUNA Gun Coating Aerosol is an innovative high-performance coating for short and long firearms that combines cleaning, lubrication, and corrosion protection in one product. After application, a dry, extremely slippery protective film forms that permanently seals metal surfaces and protects against wear, corrosion, and contamination. Unlike conventional gun oils, FLUNA Gun Coating does not remain greasy and does not harden. The transparent film is temperature-resistant, water-repellent, and does not attract dust or dirt. Ideal for precision-relevant components such as barrels, bolts, trigger units, and guides. Advantages Cleans, lubricates, and protects in one step Dry, transparent high-performance sliding film No hardening, no sticking, no dust binding Significantly reduced friction and wear Long-term corrosion protection even during storage Very economical in use Suitable for short and long firearms Technical Data Manufacturer FLUNA Tec Product Type Gun Coating / Gun Care Version Aerosol Spray Can Content 100 ml Coating Type Dry sliding and protective film Hardening No Dust Binding No Application Instructions Clean and dry the surfaces to be treated beforehand. Spray FLUNA Gun Coating thinly and let it air out briefly. Remove excess if necessary with a lint-free cloth. For optimal effect, allow the coating to cure for several hours. Note Use only for intended purpose. Keep gun care products out of reach of children. The liquid product is not hazardous material. Contains Oxirane, 2-methylpolymer with oxirane, mono-C10-16-alkyl ethers, phosphate. H222: Extremely flammable aerosol. H229: Container is under pressure: may burst if heated. H318: Causes serious eye damage. P102: Keep out of reach of children. P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. P211: Do not spray on an open flame or other ignition source. P251: Do not pierce or burn, even after use. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P501: Dispose of contents/container at municipal collection point. May form explosive/flammable vapor/air mixtures when used.