Eratac SOB 2S - The Durable

Zustandsbeschreibung: Cal. .30 The ERA® SILENCER was developed with the aim of achieving the best possible suppression with a compact design and minimal weight – all while being fully suitable for Magnum use and ensuring a long lifespan. The most important requirement for a silencer in hunting applications is to effectively suppress the muzzle blast to protect the hearing of both humans and dogs. The suppressors of the SOB series are designed as telescopic silencers (Over-Barrel). A part of the suppressor extends backward over the barrel, allowing for very good suppression values with a short net length. Additionally, the first shot noise, which is common with other silencers, is reduced to an absolute minimum. Recoil and muzzle flash are also significantly diminished. The ERA® SILENCER can be easily disassembled: The threaded bushings are interchangeable. By replacing the threaded bushing, the ERA® SILENCER can also be used on other firearms of the same caliber but with different barrel threads. Also included is a protective shield that is mounted at the rear end of the Over-Barrel suppressor. It protects the barrel thread and the suppressor from damage due to lateral forces and prevents the ingress of dirt and snow. The surface structure ensures significantly less adherence of powder residues inside the suppressor. Externally milled longitudinal grooves provide the necessary grip during installation and allow for faster cooling. The step-shaped design protects the O-rings, as there is no contact with the powder residues in the outer tube during disassembly. A coating according to MIL-SPEC MIL-A-8625F Type III meets the highest requirements for hardness and corrosion resistance. Thus, the ERA® SILENCER offers numerous advantages and is excellently equipped to withstand everyday use in hunting. Features for ERA® SILENCER high suppression performance – SOB 2S up to 31 dB No "First-round-pop" – the effect known as "first-shot noise" or "first-round-pop" is neutralized by the ERA® SILENCER through its specially designed baffle part low net length due to telescopic design – SOB 3D net length 105 mm interchangeable threaded bushing low weight – SOB 3D 326 g including ERA®LOC threaded bushing reduced recoil – due to the particularly large number of baffles, recoil is significantly reduced low muzzle flash – the muzzle flash is almost completely redirected into the suppressor interior, thus significantly reducing the blinding effect on the shooter interchangeable threaded bushing – the interchangeable threaded bushing allows the ERA® SILENCER to be easily used on other firearms of the same caliber with different barrel threads Step geometry: Low wear of the O-rings – the step-shaped design prevents damage to the O-rings, as any contact with the powder residues in the outer tube is avoided during disassembly Surface coating according to MIL-SPEC – meets the highest requirements for hardness and corrosion resistance Magnum suitable – high-strength aluminum alloys and solid wall thicknesses allow use even with Magnum calibers Features ERA® SILENCER SOB 2S "Hybrid" silencer with core and baffle part made of high-strength stainless steel Outer tube made of high-strength aluminum with reinforced wall Extremely robust and durable Suitable for shooting ranges Available only in caliber groups .30/7.62, .323/8mm, and .375/9.5mm Suppression loss when using smaller calibers > 5% Technical data SOB 2S Overall length: 235mm Barrel overhang: 130mm Net length: 105 mm Ø 51mm max. barrel diameter: 22.5 mm Suppression value: 31 dB Weight: 520g including ERA®LOC threaded bushing When ordering, please specify caliber and barrel thread
Product safety information: Manufacturer: Recknagel GmbH & Co. KG, Landwehr 4, 97493 Bergrheinfeld, GERMANY, Web: https://www.umarex.de/kontakt.html
WARNING: The presentation of a purchase authorization is required for the purchase of this product!!!