RotoClip ZFHL 36mm

The EP-Arms Rotoclip has been specifically designed for combined and standard hunting devices. With a guaranteed repeat accuracy of +/- 0.1 mm, it is the only adapter of its kind on the market.

The system, registered for worldwide patent, features clever characteristics such as fine centering when inserting the threaded insert, the interrupted round thread, and the half-shell tension on the objective of the riflescope. Due to the very small clamping range of 15 mm (short) - 25 mm (long), a combined setup with attachment devices is also possible, which no other manufacturer has achieved on the market so far.

Another significant advantage is the multiple use on different riflescopes without the need for re-sighting (only initial adjustment required). For example: You have a riflescope with a 62 mm and another with a 56 mm outer diameter. Here, you only need one additional adapter in the corresponding size of your riflescope and can interchange your device without removing the adapter.

Instructions for assembly and commissioning:

The adapter is securely fastened to the objective of the riflescope with 4-6 M3 screws with a tightening force of 1.8 Nm. The adapter must be aligned before use. This is done as before via the auxiliary crosshair of the attachment device (thermal imaging). For night vision devices, please pay attention to what the manufacturer of the devices specifies (alignment of the switch, e.g., 12 o'clock).

Once you have made the alignment, you can begin test shooting and, if necessary, correct the alignment of the adapter.

If you are satisfied with the result, you can proceed in the same way with your second riflescope. Attention!!!! Please do not correct your thermal imaging camera again, but align your adapter so that the auxiliary crosshair matches your reticle, just as with your first riflescope.

Shoot again and you will find that no significant deviations will occur.

For further questions or problems, please feel free to contact us.