Ballistol Aluminum Bluing

Shop link and availability
CLICK HERE

Ballistol Aluminium Bluing

The Ballistol Aluminium Bluing for surface finishing is the first aluminium bluing approved for end users and is therefore suitable not only for commercial users.
The black brush-on bluing for aluminium alloys is easy to apply even for laypersons and is abrasion-resistant and durable.
It is ideal for touching up scratches and wear spots, but also for re-bluing, for example, for scope mounting, handguards on semi-automatic weapons, or even for complete smaller components.
black brush-on bluing for aluminium
blues to a rich black
abrasion-resistant and durable
ideal for touching up scratches or wear spots
easy application
economical
Application tip:
The bluing impresses with its very easy application.
It is only necessary to degrease surfaces before bluing.
For this purpose, the Ballistol Cold Degreaser, the Ballistol Gun Parts Cleaner, or the Ballistol Brake and Parts Cleaner are suitable.
If necessary, the surface can also be lightly sanded.
Apply the bluing evenly and let it sit for 20-30 seconds.
Then dab dry and apply again.
After 3-4 repetitions, rinse with water and finally preserve.
Important:
Do not use below 20°C.
Product safety information: Manufacturer:
BALLISTOL GmbH
Ballistolweg 1
84168 Aham
[email protected]

EU responsible person
BALLISTOL GmbH
Ballistolweg 1
84168 Aham
[email protected]