Long gun holder system "Krabbe Pro" for headrests in the car | Jagawams

Die Krabbe Pro - the universal hunting rifle holder for the car. Rifles, shotguns, and telescopic hunting sticks are securely held in position while driving in the home territory.
Tool-free assembly: the Pro rifle holder is clamped between the rods of a headrest. The headrests usually do not need to be removed for the Krabbe Pro! By pressing the width adjustment of the Krabbe Pro rifle holder, it can be fixed at the desired height on the headrest rods.
The receptacles for the headrest rods are each tilted by about 10° to compensate for the angle of the backrests. This allows rifles, shotguns, or telescopic hunting sticks to be held nearly upright at an angle of 90°. The available diameters of the receptacles are 12 mm, 13 mm, 14 mm, 15 mm, and 16 mm. If you do not have a caliper to measure the rod diameter, you can simply wrap a piece of paper/tape around the rod, make a mark on the edge with a pen or blade, unwrap the paper, and measure the distance between the resulting edge marks. This is the circumference. Circumference/3.14 = diameter. The internal distance between the headrest rods must be measured to select the correct version.

So please measure the rod diameter and distance before ordering!

The Krabbe Pro comes with two scissor modules:

Krabbe Module A: a rifle holder for barrel diameters between 17 mm and 20 mm with a short strap

Krabbe Module B: a universal holder with a cutout for rail systems for shotgun or rifle barrel diameters between 18 mm and 22 mm with a long strap, which securely holds telescopic hunting sticks, silencers, or special bottles.

Standard delivery includes:

2x Krabbe Pro bases (black)
1x clamping axle (black/anthracite)
1x Krabbe rifle barrel module in the chosen color
1x Krabbe universal module in the chosen color

If needed, a configuration with two universal modules is also possible.
The universal module of the Krabbe Pro securely holds the weapon and hunting stick, silencer, or special bottles in position. It is not intended or designed to be used as a coat rack or backpack holder! Use of the Krabbe Pro at your own risk! Other colors or custom size requirements available upon request. Material: PETG/ASA, TPU, steel screws.