DDoptics | Nighteagle V6 2.5-15×50 | Gen3 | MRAD | A4N

```html
DDoptics riflescope | Nighteagle V6 2.5-15×50 | Gen3 | 0.1 MRAD | A4N

V6 = 6-fold zoom

13.5 m-2.2 m field of view – automatic illuminated dot IFiber
suitable for use at night, also with attachment device
reticle adjustment metal towers (no plastic)
CT glass (Clear Transmission) (low dispersion)
double scaling (Doubleturn)
zero stop for ASV (zero stop)
hard, tactical 0.1 MRAD click adjustment (1 cm/click)
minimalistic new reticle A4 (A4N)
powerful parallax compensation with 20 m close range
Accessories: 1x flip caps, cleaning cloth, DDoptics chip, target sheets, target optics manual, ballistic set

Which illuminated dot is installed in this riflescope?
By default, a manual fiber optic illuminated dot is installed in our riflescope Nighteagle V6 2.5-15×50.

New Features
What is new about the latest generation of riflescopes?
At first glance, three changes are immediately noticeable:
1. The magnification adjustment ring has been noticeably changed and now offers more grip due to its coarser structure.
2. The reticle 4 has become significantly finer and creates more space in the center.
3. The reticle adjustment is made of metal, is clearly defined, and features Doubleturn and zero stop.

Light transmission with top values
The fully coated optics, which allows no reflections, provides a brilliant image with outstanding edge sharpness. Due to the minimal amount of stray light, even backlight is not disturbing. The light transmission has peak values of 94.7% (day) and 93% (night), allowing for safe targeting until the last light of day.

Finely dimmable illuminated dot
Thanks to fiber optic technology, the illuminated dot not only becomes darker with strong dimming but also finer. The illuminated dot is continuously dimmable from backlight suitability to night vision device mode.

New reticle 4 for minimal target coverage
When looking through the new Generation III of the "Nighthawk HDX" riflescopes, the viewer immediately recognizes the practical design:
The crosshair in reticle 4N is much finer, and the originally somewhat thicker outer bars are now only half as thick and stand significantly further apart. A great advantage, especially for the hunter in poor light conditions, as the target is only minimally covered, thus optimally supporting a quick and secure shot.

The illuminated reticle 4N is located in the ocular image plane (2nd image plane) and remains the same size during magnification changes. No tools are required for adjusting the reticle. The riflescope features a tactical 0.1 MRAD adjustment, meaning that per click, the reticle adjusts by 0.1 MRAD, or 1 cm at 100 m. This means simple application in the decimal system for users in Europe. The click adjustment works absolutely repeatably and can be reset to zero after zeroing (in case multiple loads are used).

Total adjustment range:
27.5 MRAD – 275 clicks – 2.75 m
Adjustment per click at 100 m: 1 cm
Adjustment per click at 200 m: 2 cm
Adjustment per click at 300 m: 3 cm
Adjustment per click at 600 m: 6 cm

The side-mounted, continuously adjustable parallax compensation (20 yards to infinity) protects against angled views and also ensures a sharp and fatigue-free image at all magnification settings.

Weight in g:
650

Twilight number:
11.2-28.3

Magnification:
2.5-15x

Diopter adjustment:
-3 to +3

Generation:
3

Coating:
HDX III

Objective lens diameter in mm:
50

Exit pupil in mm:
10.7-3.3

Twilight number:
11.2-28.3

Field of view at 100m (in m):
13.5-2.2

Eye relief in mm:
88-89

Reticle:
New reticle 4

Illuminated dot II:
yes

Reticle image plane:
2nd image plane

Reticle adjustment / click:
0.1 MRAD

Reticle adjustment (scaling):
double

Max. adjustment range:
27.5 MRAD

Parallax compensation:
20-500-infinity

Surface:
fine black

Main tube diameter in mm:
30

ASV zero stop:
yes

Objective diameter outside in mm:
58

Ocular diameter in mm:
40.5

Total length in mm:
358
```